With the Modicon modular safety controller XPSMCMCP0802BC, safety applications can be easily configured and the system can be flexibly expanded with modules according to the application. This version 1 central processing unit (CPU) is the basic module required for every safety system on machines and systems. The configured safety application is processed in the CPU. There are 8 safe digital inputs, 2 safe OSSD output pairs and 2 status outputs available. Up to 14 expansion modules enable the connection of up to 128 safe input and 16 safe output pairs, 32 signal outputs and speed detection. Diagnostic communication with the connected PLC is possible via an optional fieldbus extension. A memory card with the saved configuration can optionally be inserted on the back of the module. The achievable safety level is PL e in category 4 or SIL 3. LED displays provide status messages for the system and for each input and output. Configuration is carried out by the user with the free SoSafe Configurable software via USB connection from a PC. Expansion modules can be connected directly using the backplane bus connector supplied. This CPU order number is therefore particularly suitable for larger applications in which extensions are planned. The supply voltage is 24 VDC. The module has removable screw terminals and a width of 22.5 mm. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy to support your sustainability goals.