With the Modicon modular safety controller XPSMCMC10804, safety applications can be easily configured and the system can be flexibly expanded with modules according to the application. This version 2 central processing unit (CPU) is the basic module required for every safety system on machines and systems. The configured safety application is processed in the CPU. There are 8 safe digital inputs, 4 safe OSSD outputs and 2 status outputs available. Up to 14 expansion modules enable the connection of up to 128 safe inputs and 32 safe outputs, 48 signal outputs, as well as speed detection and analog value evaluation. Diagnostic communication with the connected PLC is possible via an optional fieldbus extension. A memory card with the stored configuration can optionally be inserted on the back of the module. The achievable safety level is PL e in category 4 or SIL 3. LED displays provide status messages for the system and for each input and output. Configuration is carried out by the user with the free SoSafe Configurable software via USB connection from a PC. Expansion modules can be connected using a backplane bus connector, which must be ordered separately. This CPU order number is therefore particularly suitable for stand-alone applications without planned expansions. The supply voltage is 24 VDC. The module has removable screw terminals and a width of 22.5 mm. Thanks to the Green Premium eco-label, you can obtain detailed information on material content, environmental impact and circular economy to support your sustainability goals.