DEU | ENG | FRA
Log in
Support & Service
Solutions & Ideas
Contact
Sensors
Detect
Photoelectric sensors
Inductive sensors
Capacitive sensors
Ultrasonic sensors
Radar Sensors
Label Sensors
Measuring
Measure distances & spacing
Measure pressure, vacuum & dynamic pressure
Measure colors, luminescence & brightness
Measure temperature
Measure speed & position
Protecting, Monitoring
Safety light curtain
Safety switches
Safety thru-beam
Emergency safety rope pull switches
Safety Rotary Encoders
Safety liquid leak sensor
Safety modules
Mechanical switching
Microswitches
Limit switches
Position switch accessories
Wireless Limit switches
with RESET KNOB
Special versions
Automation
Electric Regulating
Logic controller
I/O Modules
XIOT Cloud Switch
Timer
Control relays
Counters
Control & Drive
Softstarter
Speed drives
Modular motor starter Tesys U
Motor starter
Hybrid starter
Move & Rotate
Motors
Pneumatic regulating
Man/Machine interface components
Detect
Pressure switch, Amplifier
Logic / Timers
Valve
Accessories, Other
Power supplies
UPS systems
Power supplies
Transformer
Converting, Transmitting
Signal conditioner
Ex Zone
Detect, Switch (Ex)
Ex Photoelectric sensors
Ex Inductive sensors
ExMo motion detector
Measuring (Ex)
Ex Laser Displacement sensor
Ex Pressure and vacuum switches
Ex IR Temperature Sensors
Ex Encoders
Control, Signaling (Ex)
Ex Individual components
Complete Ex control devices
Ex Lamp
Ex signal tower
Ex Foot Switch
Ex IP Camera
Ex laser pointer
Electric regulating (Ex)
Ex Solid state relays
Pneumatic regulating (Ex)
Ex Pneumatic indicators
Ex Logic components
Ex Timers
Valve modules
Position detectors
Ex Pressure switch
Amplifier
Ex Vacuum generator
Ex Register modules
Ex Memory
Ex Flow restrictor
Ex Sub-base, Accessories
Distribution, Insertion (Ex)
Ex Polyester enclosures
Ex equipped enclosures
Ex empty enclosures
Ex linebushings
Mechanical switching (Ex)
Ex Limit switches
Protecting, Monitoring (Ex)
Ex Key operated safety switches
Ex Coded magnetic switches
Ex Emergency safety rope pull switches
Ex Safety Rotary Encoders
Climate technology
Climatic transmitter
Air quality
Air measurement
C320 Universal Climate Transmitter
CPE320 Flush-mount pressure transmitter
Liquid manometer
Data logger
Distribution, wiring
Connection cable
Wiring Components
Capture values
Capture people
VS133 series
VS330 series
Ambience
Indoor Air Quality
Temperature & Humidity
Distances and fill levels
WS201 series
EM310-UDL series
EM400-TLD series
EM400-MUD series
EM400-UDL series
EM500-UDL series
EM500-SWL series
Energy consumption
CT10x series
Leakage
WS303 series
EM300-xLD series
Gateways, Controller und Router
LoRaWAN Gateways
LoRaWAN Displays
IoT data platform
Separation & Switching
Contactors
Contactors 2-phase
Contactors 3-phase
Contactors 4-phase
Contacteurs auxiliaires
Reversing contactors
Accessories contactors
Solid-state relays
DIN-rail mounting
Panel Mount
PCB Mount
with control functions
Accessories
Other series
Relay
Switching relay RSL1
Switching relay RSB
Interface relay RXG
Miniature relays RXM
Universal relais RUM
Power relay RPM
High power relay RPF
High Voltage Relays
Single Pole, Single Throw
Motor circuit breaker
Motor circuit breakers
Overload relays
Lightning Surge Protection
Ethernet networks
Ethernet switch with lightning protection
Transmission signals
Photovoltaic systems
Sensor signals
Power supplies
Electrical Protection and Control
Modular contactor
Circuit Breakers
Circuit Breakers remote switchable
Residual current breaker
Circuit breaker
Operating & display
Control devices
Control devices
Wireless Control devices
Pendant control station
Foot Switch
Industrial Laser Pointer
Indicator
Touchpanels
LED Bargraph Indicators
Digital Process display
Sensors
Optical, Inductive, Capacitive, Ultrasonic, IR sensors, Labelsensors, Pressure, Vacuum, Pitot pressure switch, Level control, Mechanical switches, Temperature sensors
Capture values
People counting, presence detection, temperature data acquisition, humidity data acquisition, leakages, filling levels
Solid-state relays
Panel Mount, DIN-rail mounting, PCB Mount, with control functions
Relay
Relay, Interface modules, Special relay
High Voltage Relays
High Voltage Relays, Single Pole, Double Pole, Bi-stable
Motor circuit breaker
Motor circuit breakers, Overload relays
Lightning Surge Protection
Surge protection devices, lightning protection system, surge protection, surge arrester, surge protection adapter
Electrical Protection and Control
Circuit Breakers, Residual current breaker, Circuit breaker
Automation
Controllers, PLC, Timer, Control relays, Solid state relays, Optocouplers, Counter, Temperature controls, Transmitters, Power supplies, Displays, Motors
Operating & display
Pushbuttons, rotary switches, touch panels, bargraph displays, process displays, empty and complete housings
Climate technology
Climatic transmitters, data loggers, liquid manometers, handheld instruments, measuring probes
Distribution, wiring
Connection cables, Extension cables, Jumper cables, PVC+ cables, PUR cables, Connector, Custom cables
Ex Zone
Ex Pneumatic, Ex sensors, Ex mechanical switches, Ex terminal boxes, Ex control functions, Ex linebushings
Senior products
Old series, Discontinuation, Special parts
Information
User Online: 215
Counter: 63575660

Products

>

Separation & Switching

>

Contactors

>

Contactors 3-phase

Series, Models
Accessories

Contactors 3-phase

Switching of loads
 
Brand
Schneider Electric (864)
Series
TeSys D green (49)
TeSys D (607)
TeSys F (36)
TeSys Giga (47)
TeSys K (171)
TeSys SKGC (3)
Number of Poles
3 (863)
4 (1)
Current ohmic loads (AC-1)
1000 A (9)
125 A (62)
1260 A (1)
1600 A (3)
1700 A (2)
20 A (118)
200 A (73)
2100 A (2)
25 A (134)
250 A (5)
260 A (1)
275 A (6)
305 A (5)
32 A (59)
330 A (5)
385 A (5)
40 A (57)
400 A (2)
440 A (5)
50 A (92)
500 A (1)
550 A (5)
60 A (32)
700 A (4)
80 A (69)
n/a (107)
Power motor applic. (AC-3)
1000 A (4)
115 A (45)
12 A (103)
12,5 KVAr / 400V (6)
150 A (42)
16 A (1)
16,7 KVAr / 400V (3)
18 A (59)
185 A (5)
20 KVAr / 400V (2)
225 A (6)
25 A (57)
25 KVAr / 400V (6)
265 A (6)
275 A (1)
30 KVAr / 400V (5)
32 A (54)
330 A (6)
38 A (38)
40 A (32)
40 KVAr / 400V (3)
400 A (6)
50 A (25)
500 A (5)
6 A (56)
63 KVAr / 400V (4)
630 A (10)
65 A (44)
780 A (5)
80 A (40)
800 A (8)
9 A (148)
95 A (22)
n/a (7)
Control voltage
100 Vac (10)
100 Vdc (2)
100...250 Vac/dc (22)
110 Vac (56)
110 Vdc (Low consumption) (4)
110 Vdc (35)
115 Vac (21)
12 Vdc (Low consumption) (7)
12 Vdc (18)
120 Vac (27)
125 Vdc (11)
127 Vac (4)
200 Vac (14)
200…500 Vac/dc (11)
21 Vac (1)
220 Vac (46)
220 Vdc (Low consumption) (2)
220 Vdc (27)
230 Vac (68)
24 Vac (46)
24 Vdc (Low consumption) (37)
24 Vdc (106)
24...60 Vac/dc (14)
240 Vac (29)
24…48 Vac/dc (8)
250 Vdc (2)
277 Vac (1)
36 Vdc (9)
380 Vac (24)
400 Vac (26)
400 Vdc (1)
415 Vac (18)
42 Vac (16)
440 Vac (20)
440 Vdc (4)
48 Vac (38)
48 Vdc (Low consumption) (8)
48 Vdc (34)
48...130 Vac/dc (34)
480 Vac (9)
500 Vac (4)
60 Vdc (9)
600 Vac (4)
690 Vac (1)
72 Vdc (Low consumption) (4)
72 Vdc (23)
without coil (11)
Additional Contact
1x NC (76)
1x NC (76)
1x NO + 1x NC (647)
1x NO + 2x NC (7)
1x NO (752)
without (36)
Connetction
EverLink (control by spring terminals) (15)
EverLink (control by screw clamp terminal) (74)
Spring terminals (80)
Faston terminals (7)
Solder-pins (17)
Lugs-ring terminals (115)
Rail (36)
Screw clamp terminals or connectors (107)
Screw clamp terminals (520)
864 Results
Sort by
Availability

Ø 7 - 15 working days (*)
Schneider Electric LC1 D093B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
55.80 CHF
on request
Schneider Electric LC1 D093BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
103.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
81.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
56.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
103.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
55.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
103.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
56.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093FL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
81.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
55.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D093GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
104.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
56.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
104.40 CHF
1 pcs available immediately
Schneider Electric LC1 D093N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
55.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
103.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
55.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D093U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
65.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
79.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096BLS207
  • Railroad applications
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
95.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096FLS207
  • Railroad applications
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
95.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096KD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 100 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
54.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
101.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096SL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 72 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
79.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D096SLS207
  • Railroad applications
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
95.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D099F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Faston terminals
58.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D099G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Faston terminals
58.00 CHF
5 pcs available immediately
Schneider Electric LC1 D09B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
3 pcs available immediately
Schneider Electric LC1 D09BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
4 pcs available immediately
Schneider Electric LC1 D09BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
76.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
101.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
5 pcs available immediately
Schneider Electric LC1 D09E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
101.50 CHF
2 pcs available immediately
Schneider Electric LC1 D09EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
77.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
76.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
99.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
5 pcs available immediately
Schneider Electric LC1 D09P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09RD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 440 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
98.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D09UD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 250 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
99.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09W7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 277 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09X7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 600 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D09Y7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 690 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
52.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
692.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
692.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
692.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
692.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D1156U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
613.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
674.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
680.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
674.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
721.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
674.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115RD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 440 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
680.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115S7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 500 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
674.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D115U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D115V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
618.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
94.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
114.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D123V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
64.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D126B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D126BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
111.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D126BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
91.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126BLS207
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D126ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
111.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
111.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126FL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D126L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.50 CHF
on request
Schneider Electric LC1 D126M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
62.00 CHF
on request
Schneider Electric LC1 D126SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
111.30 CHF
on request
Schneider Electric LC1 D129SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Faston terminals
114.80 CHF
1 pcs available immediately
Schneider Electric LC1 D12B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
3 pcs available immediately
Schneider Electric LC1 D12BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
88.50 CHF
on request
Schneider Electric LC1 D12BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
108.80 CHF
on request
Schneider Electric LC1 D12C7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 127 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
3 pcs available immediately
Schneider Electric LC1 D12E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
108.80 CHF
on request
Schneider Electric LC1 D12EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
88.50 CHF
on request
Schneider Electric LC1 D12F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
88.50 CHF
on request
Schneider Electric LC1 D12K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.80 CHF
on request
Schneider Electric LC1 D12KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.40 CHF
on request
Schneider Electric LC1 D12L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
108.80 CHF
6 pcs available immediately
Schneider Electric LC1 D12P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12RD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 440 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
108.80 CHF
on request
Schneider Electric LC1 D12SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
on request
Schneider Electric LC1 D12T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
on request
Schneider Electric LC1 D12X7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 600 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.80 CHF
on request
Schneider Electric LC1 D12Z7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 25 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 21 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
60.80 CHF
on request
Schneider Electric LC1 D1506B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
813.20 CHF
on request
Schneider Electric LC1 D1506E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
813.20 CHF
on request
Schneider Electric LC1 D1506G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
820.60 CHF
on request
Schneider Electric LC1 D1506N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
695.30 CHF
on request
Schneider Electric LC1 D1506R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D1506U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
689.60 CHF
on request
Schneider Electric LC1 D150B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
813.20 CHF
on request
Schneider Electric LC1 D150D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
771.00 CHF
on request
Schneider Electric LC1 D150E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
820.60 CHF
on request
Schneider Electric LC1 D150F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
813.20 CHF
on request
Schneider Electric LC1 D150FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
813.20 CHF
on request
Schneider Electric LC1 D150K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
771.00 CHF
on request
Schneider Electric LC1 D150M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
813.20 CHF
on request
Schneider Electric LC1 D150N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
813.20 CHF
on request
Schneider Electric LC1 D150T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D150V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 200 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
764.50 CHF
on request
Schneider Electric LC1 D183B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
84.60 CHF
on request
Schneider Electric LC1 D183BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
146.80 CHF
on request
Schneider Electric LC1 D183BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
124.60 CHF
on request
Schneider Electric LC1 D183E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
84.60 CHF
on request
Schneider Electric LC1 D183ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
148.20 CHF
on request
Schneider Electric LC1 D183F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
84.60 CHF
on request
Schneider Electric LC1 D183FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
84.60 CHF
on request
Schneider Electric LC1 D183G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
85.30 CHF
on request
Schneider Electric LC1 D183MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
146.80 CHF
on request
Schneider Electric LC1 D183P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
84.60 CHF
on request
Schneider Electric LC1 D183U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
85.30 CHF
on request
Schneider Electric LC1 D186B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
141.30 CHF
on request
Schneider Electric LC1 D186BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
118.70 CHF
on request
Schneider Electric LC1 D186E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.50 CHF
on request
Schneider Electric LC1 D186F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
143.30 CHF
on request
Schneider Electric LC1 D186G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
141.30 CHF
on request
Schneider Electric LC1 D186P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.00 CHF
on request
Schneider Electric LC1 D186R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.50 CHF
on request
Schneider Electric LC1 D186SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
143.30 CHF
on request
Schneider Electric LC1 D186SL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 72 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
118.70 CHF
on request
Schneider Electric LC1 D186U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
82.50 CHF
5 pcs available immediately
Schneider Electric LC1 D18B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
3 pcs available immediately
Schneider Electric LC1 D18BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
3 pcs available immediately
Schneider Electric LC1 D18BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
on request
Schneider Electric LC1 D18BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
141.30 CHF
on request
Schneider Electric LC1 D18CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
139.90 CHF
on request
Schneider Electric LC1 D18D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
5 pcs available immediately
Schneider Electric LC1 D18E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
141.30 CHF
on request
Schneider Electric LC1 D18EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
119.70 CHF
on request
Schneider Electric LC1 D18F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18FL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 110 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
on request
Schneider Electric LC1 D18G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
on request
Schneider Electric LC1 D18K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
80.40 CHF
on request
Schneider Electric LC1 D18KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
135.90 CHF
on request
Schneider Electric LC1 D18L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
80.40 CHF
on request
Schneider Electric LC1 D18M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18ML
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 220 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
114.30 CHF
on request
Schneider Electric LC1 D18N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
5 pcs available immediately
Schneider Electric LC1 D18P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
on request
Schneider Electric LC1 D18T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D18V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 32 A
  • Power motor applic. (AC-3) 18 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
79.60 CHF
on request
Schneider Electric LC1 D253B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
on request
Schneider Electric LC1 D253BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
181.20 CHF
on request
Schneider Electric LC1 D253BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
149.20 CHF
on request
Schneider Electric LC1 D253E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
114.80 CHF
on request
Schneider Electric LC1 D253F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
on request
Schneider Electric LC1 D253FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
181.20 CHF
on request
Schneider Electric LC1 D253FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
114.80 CHF
on request
Schneider Electric LC1 D253MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
181.20 CHF
on request
Schneider Electric LC1 D253P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
on request
Schneider Electric LC1 D253V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
113.80 CHF
on request
Schneider Electric LC1 D256B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D256BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
176.80 CHF
on request
Schneider Electric LC1 D256BDS207
  • Railroad applications
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
188.10 CHF
on request
Schneider Electric LC1 D256BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
176.80 CHF
on request
Schneider Electric LC1 D256F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D256FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
176.80 CHF
on request
Schneider Electric LC1 D256G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
110.80 CHF
on request
Schneider Electric LC1 D256KD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 100 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
176.80 CHF
on request
Schneider Electric LC1 D256L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D256M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D256P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
on request
Schneider Electric LC1 D256U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
109.80 CHF
5 pcs available immediately
Schneider Electric LC1 D25B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
3 pcs available immediately
Schneider Electric LC1 D25BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
5 pcs available immediately
Schneider Electric LC1 D25BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
140.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
167.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25C7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 127 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
5 pcs available immediately
Schneider Electric LC1 D25E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
167.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
140.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25FC7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 127 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D25JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
140.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
165.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D25N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
5 pcs available immediately
Schneider Electric LC1 D25P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25S7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 500 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
171.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D25U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D25UD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 250 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
173.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D25V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
106.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D25X7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 40 A
  • Power motor applic. (AC-3) 25 A
  • Control voltage 600 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
107.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D323B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
158.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D323BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
226.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D323BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
200.90 CHF
on request
Schneider Electric LC1 D323ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
226.50 CHF
on request
Schneider Electric LC1 D323F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
158.60 CHF
on request
Schneider Electric LC1 D323FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
158.60 CHF
on request
Schneider Electric LC1 D323FL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
200.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D323M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
160.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D323MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
226.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D323P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Spring terminals
158.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
156.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
224.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
199.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
156.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
226.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
158.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
226.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
156.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
158.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
156.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D326R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
158.10 CHF
5 pcs available immediately
Schneider Electric LC1 D32B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
3 pcs available immediately
Schneider Electric LC1 D32BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
4 pcs available immediately
Schneider Electric LC1 D32BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
193.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
214.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
5 pcs available immediately
Schneider Electric LC1 D32E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
214.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
195.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
195.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
152.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32LE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D32ML
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 220 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
195.00 CHF
on request
Schneider Electric LC1 D32N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
219.70 CHF
6 pcs available immediately
Schneider Electric LC1 D32P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32S7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 500 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
220.60 CHF
on request
Schneider Electric LC1 D32T7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
151.20 CHF
on request
Schneider Electric LC1 D32X7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 32 A
  • Control voltage 600 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
152.20 CHF
on request
Schneider Electric LC1 D383BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
237.40 CHF
on request
Schneider Electric LC1 D383E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
189.60 CHF
on request
Schneider Electric LC1 D383P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
188.10 CHF
on request
Schneider Electric LC1 D386B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
183.20 CHF
on request
Schneider Electric LC1 D386BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
251.20 CHF
on request
Schneider Electric LC1 D386BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
228.50 CHF
on request
Schneider Electric LC1 D386CD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
253.10 CHF
on request
Schneider Electric LC1 D386F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
183.20 CHF
on request
Schneider Electric LC1 D386FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
251.20 CHF
on request
Schneider Electric LC1 D386L7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
181.20 CHF
on request
Schneider Electric LC1 D386M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
181.20 CHF
on request
Schneider Electric LC1 D386MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
253.10 CHF
on request
Schneider Electric LC1 D386SL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 72 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
231.50 CHF
2 pcs available immediately
Schneider Electric LC1 D38B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
5 pcs available immediately
Schneider Electric LC1 D38BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
4 pcs available immediately
Schneider Electric LC1 D38BL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
223.60 CHF
on request
Schneider Electric LC1 D38BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
4 pcs available immediately
Schneider Electric LC1 D38E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38EL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
223.60 CHF
on request
Schneider Electric LC1 D38F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38JD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38JL
  • For currents below 10 mA
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
225.60 CHF
on request
Schneider Electric LC1 D38KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
239.40 CHF
on request
Schneider Electric LC1 D38M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
243.30 CHF
on request
Schneider Electric LC1 D38N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
6 pcs available immediately
Schneider Electric LC1 D38P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
246.20 CHF
on request
Schneider Electric LC1 D38U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D38V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 50 A
  • Power motor applic. (AC-3) 38 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
176.80 CHF
on request
Schneider Electric LC1 D40A3B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
204.90 CHF
on request
Schneider Electric LC1 D40A3BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
265.00 CHF
on request
Schneider Electric LC1 D40A3E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
202.90 CHF
on request
Schneider Electric LC1 D40A3F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
204.90 CHF
on request
Schneider Electric LC1 D40A3P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
202.90 CHF
on request
Schneider Electric LC1 D40A6BBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
318.10 CHF
on request
Schneider Electric LC1 D40A6BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
302.40 CHF
on request
Schneider Electric LC1 D40A6EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
302.40 CHF
on request
Schneider Electric LC1 D40A6KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
309.30 CHF
5 pcs available immediately
Schneider Electric LC1 D40AB7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40ABBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
267.90 CHF
1 pcs available immediately
Schneider Electric LC1 D40ABD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
253.10 CHF
on request
Schneider Electric LC1 D40ABNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
260.00 CHF
on request
Schneider Electric LC1 D40ACD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
255.10 CHF
on request
Schneider Electric LC1 D40AD7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
3 pcs available immediately
Schneider Electric LC1 D40AE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
253.10 CHF
on request
Schneider Electric LC1 D40AEHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
257.10 CHF
on request
Schneider Electric LC1 D40AF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AFE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AG7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AJD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
253.10 CHF
on request
Schneider Electric LC1 D40AKUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
263.00 CHF
on request
Schneider Electric LC1 D40ALE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
193.10 CHF
on request
Schneider Electric LC1 D40AM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
1 pcs available immediately
Schneider Electric LC1 D40AP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AQ7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AR7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40AV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
191.60 CHF
on request
Schneider Electric LC1 D40BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
493.50 CHF
on request
Schneider Electric LC1 D40P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 60 A
  • Power motor applic. (AC-3) 40 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
360.50 CHF
on request
Schneider Electric LC1 D50A3BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
330.00 CHF
on request
Schneider Electric LC1 D50A3E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
248.20 CHF
on request
Schneider Electric LC1 D50A3P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
246.20 CHF
on request
Schneider Electric LC1 D50A6BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
380.20 CHF
on request
Schneider Electric LC1 D50A6EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
380.20 CHF
on request
Schneider Electric LC1 D50A6KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
386.10 CHF
on request
Schneider Electric LC1 D50AB7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50ABBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
344.70 CHF
on request
Schneider Electric LC1 D50ABD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
321.10 CHF
on request
Schneider Electric LC1 D50ABNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
331.90 CHF
on request
Schneider Electric LC1 D50ACD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
321.10 CHF
on request
Schneider Electric LC1 D50AD7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
330.00 CHF
on request
Schneider Electric LC1 D50AEHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
331.90 CHF
on request
Schneider Electric LC1 D50AF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AFE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AKUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
340.80 CHF
on request
Schneider Electric LC1 D50AM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
235.40 CHF
on request
Schneider Electric LC1 D50AP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AQ7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AR7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50AU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
231.50 CHF
on request
Schneider Electric LC1 D50AV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
235.40 CHF
on request
Schneider Electric LC1 D50P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 50 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
489.50 CHF
on request
Schneider Electric LC1 D65A3B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
340.80 CHF
on request
Schneider Electric LC1 D65A3BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
457.00 CHF
on request
Schneider Electric LC1 D65A3E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
340.80 CHF
on request
Schneider Electric LC1 D65A3F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
336.90 CHF
on request
Schneider Electric LC1 D65A3FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
336.90 CHF
on request
Schneider Electric LC1 D65A3P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by spring terminals)
336.90 CHF
on request
Schneider Electric LC1 D65A6BBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
536.80 CHF
on request
Schneider Electric LC1 D65A6BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
503.30 CHF
on request
Schneider Electric LC1 D65A6EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
503.30 CHF
on request
Schneider Electric LC1 D65A6KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
528.90 CHF
3 pcs available immediately
Schneider Electric LC1 D65AB7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65ABBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
490.50 CHF
on request
Schneider Electric LC1 D65ABD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
444.20 CHF
on request
Schneider Electric LC1 D65ABNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
456.00 CHF
on request
Schneider Electric LC1 D65AD7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
3 pcs available immediately
Schneider Electric LC1 D65AE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
458.00 CHF
on request
Schneider Electric LC1 D65AEHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
456.00 CHF
on request
Schneider Electric LC1 D65AF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AFE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AKUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
483.60 CHF
on request
Schneider Electric LC1 D65ALE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
2 pcs available immediately
Schneider Electric LC1 D65AP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AQ7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AR7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65ASD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
444.20 CHF
on request
Schneider Electric LC1 D65AU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65AV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
326.00 CHF
on request
Schneider Electric LC1 D65BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
903.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D65P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
614.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D806B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
412.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D806BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D806FW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
607.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D806K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
415.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D806P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80A6BBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
620.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80A6BNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
599.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80A6EHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
600.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80A6KUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
604.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AB7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80ABBE
  • Green Edition
  • For currents below 10 mA
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
600.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D80ABNE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24...60 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
554.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D80AE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AEHE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
414.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AFE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AG7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
414.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AKUE
  • Green Edition
  • Series TeSys D green
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
559.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
414.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AN7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
414.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AQ7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AR7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AT7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
413.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80AV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 80 A
  • Power motor applic. (AC-3) 65 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction EverLink (control by screw clamp terminal)
418.60 CHF
3 pcs available immediately
Schneider Electric LC1 D80B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
5 pcs available immediately
Schneider Electric LC1 D80BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80BW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
602.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80CW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 36 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
602.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
1 pcs available immediately
Schneider Electric LC1 D80E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80FW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
602.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80GD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80K7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80L6
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 200 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
554.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80MW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80ND
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 60 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
560.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
560.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80SW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D80V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 80 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
412.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D956F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Lugs-ring terminals
593.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95B7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95BD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95BW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
659.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95D7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 42 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95E7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95ED
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95FD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95FE7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95G7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95MD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95MW
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
665.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95N7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95Q7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95R7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95S5
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 500 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95SD
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
607.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 D95U7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 D95V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) 125 A
  • Power motor applic. (AC-3) 95 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals or connectors
508.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DFKB7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 24 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DFKF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DFKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DFKP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DFKU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
118.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DFKV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 12,5 KVAr / 400V
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
119.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DGKF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 16,7 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DGKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 16,7 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DGKP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 16,7 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
137.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DLKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 20 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
156.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DLKQ7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 20 KVAr / 400V
  • Control voltage 380 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
158.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DMKF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
175.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DMKG7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 120 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
177.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DMKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
175.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DMKP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
175.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DMKU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
175.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DMKV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 25 KVAr / 400V
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
177.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DPKF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 30 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
274.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DPKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 30 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
272.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DPKP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 30 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
272.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 DPKU7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 30 KVAr / 400V
  • Control voltage 240 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
272.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DPKV7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 30 KVAr / 400V
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
274.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DTKF7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 40 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
413.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DTKM7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 40 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
413.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DTKP7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 40 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
413.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DWK12F7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 63 KVAr / 400V
  • Control voltage 110 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
531.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DWK12M7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 63 KVAr / 400V
  • Control voltage 220 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
531.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DWK12P7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 63 KVAr / 400V
  • Control voltage 230 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
531.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 DWK12V7
  • Series TeSys D
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 63 KVAr / 400V
  • Control voltage 400 Vac
  • Additional Contact 1x NO + 2x NC
  • Connetction Screw clamp terminals
531.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1000
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 1000 A
  • Control voltage 440 Vdc
  • Additional Contact without
  • Connetction Rail
7555.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1000F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 1000 A
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
7998.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1000P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 1000 A
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
7998.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1000V7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 1000 A
  • Control voltage 400 Vac
  • Additional Contact without
  • Connetction Rail
7998.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F115
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 115 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
711.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 F115BD
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24 Vdc
  • Additional Contact without
  • Connetction Rail
899.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 F1250F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 260 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
8419.80 CHF
on request
Schneider Electric LC1 F1250P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1260 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
8419.80 CHF
on request
Schneider Electric LC1 F1400P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 400 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
8828.50 CHF
on request
Schneider Electric LC1 F150
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 150 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
843.20 CHF
on request
Schneider Electric LC1 F150BD
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24 Vdc
  • Additional Contact without
  • Connetction Rail
1073.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1700F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1700 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
9282.89 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F1700P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1700 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
9282.89 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F185
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 275 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
853.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F2100F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 2100 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
12437.37 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F2100P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 2100 A
  • Power motor applic. (AC-3) n/a
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
12437.37 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F225
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 225 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
1192.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F265
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 265 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
1441.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F330
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 400 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
1812.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F400
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 500 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
1937.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F500
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 500 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
3026.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F630
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 630 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
4679.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 F630F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 630 A
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
5118.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 F630M7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 630 A
  • Control voltage 220 Vac
  • Additional Contact without
  • Connetction Rail
5118.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F630P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 630 A
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
5118.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F630Q7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 630 A
  • Control voltage 380 Vac
  • Additional Contact without
  • Connetction Rail
5118.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F630U7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 630 A
  • Control voltage 240 Vac
  • Additional Contact without
  • Connetction Rail
5118.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F780
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 780 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
7787.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F780F7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1600 A
  • Power motor applic. (AC-3) 780 A
  • Control voltage 110 Vac
  • Additional Contact without
  • Connetction Rail
8542.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 F780M7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 780 A
  • Control voltage 220 Vac
  • Additional Contact without
  • Connetction Rail
8542.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F780P7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1600 A
  • Power motor applic. (AC-3) 780 A
  • Control voltage 230 Vac
  • Additional Contact without
  • Connetction Rail
8542.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F780Q7
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1600 A
  • Power motor applic. (AC-3) 780 A
  • Control voltage 380 Vac
  • Additional Contact without
  • Connetction Rail
8542.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F800
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 800 A
  • Control voltage without coil
  • Additional Contact without
  • Connetction Rail
7416.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F800FW
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 800 A
  • Control voltage 110 Vdc
  • Additional Contact without
  • Connetction Rail
8027.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F800MW
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 800 A
  • Control voltage 220 Vdc
  • Additional Contact without
  • Connetction Rail
8027.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 F800QW
  • Series TeSys F
  • Number of Poles 3
  • Current ohmic loads (AC-1) 1000 A
  • Power motor applic. (AC-3) 800 A
  • Control voltage 400 Vdc
  • Additional Contact without
  • Connetction Rail
8027.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G115BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 250 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
757.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G115EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 250 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
757.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G115EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 250 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
679.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G115KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 250 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
679.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G115LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 250 A
  • Power motor applic. (AC-3) 115 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
780.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G150BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
911.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G150EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
911.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G150EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
817.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G150KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
817.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G150LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 275 A
  • Power motor applic. (AC-3) 150 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
938.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G185BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 305 A
  • Power motor applic. (AC-3) 185 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1136.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G185EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 305 A
  • Power motor applic. (AC-3) 185 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1136.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G185EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 305 A
  • Power motor applic. (AC-3) 185 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1017.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G185KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 305 A
  • Power motor applic. (AC-3) 185 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1017.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G185LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 305 A
  • Power motor applic. (AC-3) 185 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1169.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G225BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 330 A
  • Power motor applic. (AC-3) 225 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1278.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G225EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 330 A
  • Power motor applic. (AC-3) 225 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1278.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G225EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 330 A
  • Power motor applic. (AC-3) 225 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1143.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G225KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 330 A
  • Power motor applic. (AC-3) 225 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1143.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G225LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 330 A
  • Power motor applic. (AC-3) 225 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1316.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G265BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 385 A
  • Power motor applic. (AC-3) 265 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1713.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G265EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 385 A
  • Power motor applic. (AC-3) 265 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1713.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G265EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 385 A
  • Power motor applic. (AC-3) 265 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1533.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G265KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 385 A
  • Power motor applic. (AC-3) 265 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1533.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G265LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 385 A
  • Power motor applic. (AC-3) 265 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1764.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G330BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 440 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2066.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G330EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 440 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2066.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G330EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 440 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1850.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G330KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 440 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
1850.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G330LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 440 A
  • Power motor applic. (AC-3) 330 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2127.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G400BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 550 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2503.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G400EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 550 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2503.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G400EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 550 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2243.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G400KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 550 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2243.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G400LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 550 A
  • Power motor applic. (AC-3) 400 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
2579.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G500BEEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 700 A
  • Power motor applic. (AC-3) 500 A
  • Control voltage 24…48 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
3767.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G500EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 700 A
  • Power motor applic. (AC-3) 500 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
3767.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G500EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 700 A
  • Power motor applic. (AC-3) 500 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
3374.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G500LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) 700 A
  • Power motor applic. (AC-3) 500 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
3880.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G630EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 630 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
7127.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G630EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 630 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
6197.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G630KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 630 A
  • Control voltage 100...250 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
6197.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G630LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 630 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
7127.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G800EHEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 800 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
7814.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G800EHEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 800 A
  • Control voltage 48...130 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
6794.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 G800KUEN
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 800 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
6794.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 G800LSEA
  • Series TeSys Giga
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 800 A
  • Control voltage 200…500 Vac/dc
  • Additional Contact 1x NO + 1x NC
  • Connetction Screw clamp terminals
7814.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06013P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Spring terminals
46.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K06015B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Solder-pins
44.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06017P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Faston terminals
44.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601D7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 42 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 48 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601F72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601N7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 415 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0601P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601P72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601Q7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 380 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0601U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 240 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06103B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Spring terminals
46.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06103P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Spring terminals
46.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06105B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Solder-pins
44.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06105P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Solder-pins
44.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K06107P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Faston terminals
44.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610B72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
48.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610F72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
48.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610FE7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610N7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610P72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
48.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610Q7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610T7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 480 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0610V7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
43.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09013P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Spring terminals
50.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09015B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Solder-pins
49.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09017B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Faston terminals
49.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0901B72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
53.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0901C7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 127 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0901D7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 42 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901F72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
53.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901G7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901N7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 415 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901P72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
52.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901Q7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 380 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 240 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0901V7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 400 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
48.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09103B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Spring terminals
50.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09103M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Spring terminals
51.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09105E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Solder-pins
49.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09105P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Solder-pins
58.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K09107E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Faston terminals
49.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0910B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910F72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
53.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910G7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0910N7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 415 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910P72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910Q7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K0910R7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 440 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
48.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0910U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K0910V7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
47.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K12013F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Spring terminals
59.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1201B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1201D7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 42 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
55.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1201E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
55.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1201F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1201M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1201P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1201U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 240 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
55.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1201V7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 400 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
55.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K12105P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Solder-pins
57.50 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1210B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1210F72
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
61.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210FE7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 115 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
53.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210G7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 120 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
5 pcs available immediately
Schneider Electric LC1 K1210K7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 100 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
55.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210Q7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 380 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210U7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 240 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 K1210V7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 400 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 K1610P7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 16 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
64.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC1 SKGC301P7
  • Series TeSys SKGC
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
51.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 SKGC310E7
  • Series TeSys SKGC
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC1 SKGC310P7
  • Series TeSys SKGC
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 230 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
51.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LC7 K0601M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
70.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K0610M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
70.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K09004M7
  • Series TeSys K
  • Number of Poles 4
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
49.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K09015M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Solder-pins
68.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K0901M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
67.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K0910B7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
67.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K0910M7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
67.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K1201E7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vac
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
76.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LC7 K1210F7
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vac
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
77.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K06013BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Spring terminals
54.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0601BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0601BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
58.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0601ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
53.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0601FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
53.60 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0601MD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
52.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K06103BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
54.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K06103BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
60.10 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K06105BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Solder-pins
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610JD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
52.90 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0610MD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
53.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K09013BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Spring terminals
56.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K09013BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Spring terminals
63.00 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K09015BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Solder-pins
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
60.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901ED3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
61.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901JD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0901MD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K09103BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
56.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K09103BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
63.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K09105BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Solder-pins
56.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0910BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
60.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910ED3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
60.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K0910FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910GD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 125 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
55.60 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910JD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910MD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 220 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K0910SD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 72 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
54.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K12013BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Spring terminals
64.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K12015BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Solder-pins
58.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1201BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
58.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1201BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
64.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1201ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
58.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1201FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
58.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K12103BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
59.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP1 K12103BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Spring terminals
65.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K12105BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Solder-pins
58.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1210BD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1210BD3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
63.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1210ED
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1210FD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 110 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP1 K1210JD
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 12 Vdc
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K06013BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Spring terminals
60.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0601BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
58.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K06103BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Spring terminals
60.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K06105BW3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Solder-pins
61.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0610BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0610EW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) n/a
  • Power motor applic. (AC-3) 6 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
58.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K09013BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Spring terminals
61.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K09015BW3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Solder-pins
59.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0901BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
59.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K09103BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Spring terminals
61.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K09105BW3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NO
  • Connetction Solder-pins
63.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0910BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
59.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K0910JW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 9 A
  • Control voltage 12 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
59.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K12015BW3
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc
  • Additional Contact 1x NC
  • Connetction Solder-pins
68.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LP4 K1201BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
68.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP4 K1201EW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 48 Vdc (Low consumption)
  • Additional Contact 1x NC
  • Connetction Screw clamp terminals
68.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP4 K12103BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Spring terminals
71.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP4 K1210BW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 24 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
68.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LP4 K1210SW3
  • For low control currents below 10 mA
  • Series TeSys K
  • Number of Poles 3
  • Current ohmic loads (AC-1) 20 A
  • Power motor applic. (AC-3) 12 A
  • Control voltage 72 Vdc (Low consumption)
  • Additional Contact 1x NO
  • Connetction Screw clamp terminals
69.20 CHF
Webshop by Trade-System - Copyright by Sentronic AG | Impressum + AGB | Contact | Privacy Policy
 
 

ABOUT US

 PRODUCTS SUPPORT AND SERVICE OUR PARTNER
  Company
Your requirements
Contact
Vacancies

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG		 Sensors
Automation
Components
Distribution, Wiring
Ex Zone


ACTUAL
 News
OEM Login Request		 Call orders
More than 30 years of experience
Your requirements, our solutions
Testing units

Sensor KnowHow

Software Download

Available second source solutions		 Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Due to worldwide resource problems, there may be deviations in the stated delivery times!