SENTRONIC AG - Votre partenaire industriel Suisse

QUI SOMMES-NOUS

PRODUITS

SUPPORT ET SERVICE

NOS PARTENAIRES

Société
Vos exigences
Contact
Postes vacants

+41 (0)56 222 38 18
mailbox@sentronic.com

Capteurs
Automation
Composants
Distribution, Câblage
Zone Ex

ACTUALITES
News
OEM Login

Commande sur appel
Plus de 30 ans d'expérience
Vos exigences, nos solutions
Dispositifs de test

Savoir-faire des capteurs

Téléchargement de logiciels

Solutions de seconde source disponibles

Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System

(*) En raison des problèmes de ressources dans le monde entier, les délais de livraison indiqués peuvent varier!

sur demande


Panasonic SL-CP2


43.20 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A1113

	Terminale display HMI - 128 x 64 pixel - IP21 BASIS DISPLAY This plain text terminal is an option for variable speed drives of Altivar range. It is a dialogue option for the variable speed drive. Its protection index is IP21. The plain text display terminal can be connected and mounted on the front of the drive. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 128 x 64 pixels. It weighs 200g. It is used to control, adjust, and configure the drive, display current values (motor, I/O, and machine data), store and download configurations (several configurations can be stored) and duplicate the configuration of one to another drive. A remote mounting kit for mounting on enclosure door with IP43 degree of protection is available as accessory, to be ordered separately. This plain text terminal is an option for variable speed drives of Altivar range. It is a dialogue option for the variable speed drive. Its protection index is IP21. The plain text display terminal can be connected and mounted on the front of the drive. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 128 x 64 pixels. It weighs 200g. It is used to control, adjust, and configure the drive, display current values (motor, I/O, and machine data), store and download configurations (several configurations can be stored) and duplicate the configuration of one to another drive. A remote mounting kit for mounting on enclosure door with IP43 degree of protection is available as accessory, to be ordered separately.
158.80 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A1114

	Kit per remotare VW3A1113 su fronte quadro Montagekit für Display VW3A1113 This basic keypad door mounting kit is an accessory for variable speed drives of Altivar range. It is designed for mounting the graphic display VW3A1113 on an enclosure door with IP 43 degree of protection as standard. The kit comprises, a tightening tool, a mounting plate, RJ45 port for the plain text display terminal, seal, fixing nut, RJ45 port for connecting the remote-mounting cordset, cordsets should be ordered separately. A remote-mounting cordset VW3A1104Rxx has to be ordered separately. This basic keypad door mounting kit is an accessory for variable speed drives of Altivar range. It is designed for mounting the graphic display VW3A1113 on an enclosure door with IP 43 degree of protection as standard. The kit comprises, a tightening tool, a mounting plate, RJ45 port for the plain text display terminal, seal, fixing nut, RJ45 port for connecting the remote-mounting cordset, cordsets should be ordered separately. A remote-mounting cordset VW3A1104Rxx has to be ordered separately.
49.70 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A31101

	Terminale remoto - Per azionamento motore passo-passo, az. vel. var - ATV31 Dezentrales Bedienterminal, f. Schrittmotorverstärker, Frequenzumrichter ATV31 This 4-digit display terminal is an option for variable speed drives of Altivar range and servo drives of Lexium range. It is a dialogue option for the variable speed drive or servo drive. Its protection index is IP65. This terminal can be mounted on an enclosure door. It is supplied with a cordset equipped with 2 connectors, a seal and screws. It weighs 380g. It is used to show the drive states, faults and parameter values of the drive. The navigation buttons are used to navigate through the menus, modify values and enter the main settings. This 4-digit display terminal is an option for variable speed drives of Altivar range and servo drives of Lexium range. It is a dialogue option for the variable speed drive or servo drive. Its protection index is IP65. This terminal can be mounted on an enclosure door. It is supplied with a cordset equipped with 2 connectors, a seal and screws. It weighs 380g. It is used to show the drive states, faults and parameter values of the drive. The navigation buttons are used to navigate through the menus, modify values and enter the main settings.
310.80 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3202

	Scheda I/O estesi Optionskarte E/A-Erweiterung erweitert, für ATV61/ATV71 This extended I/O card enables your drive to meet the needs of more complex or extensive applications. It comprises four logic inputs, two analog inputs, one input for PTC probe and one frequency control input. It also comprises three logic outputs and two analog outputs. It is compatible with Altivar 61 and Altivar 71. This extended I/O card enables your drive to meet the needs of more complex or extensive applications. It comprises four logic inputs, two analog inputs, one input for PTC probe and one frequency control input. It also comprises three logic outputs and two analog outputs. It is compatible with Altivar 61 and Altivar 71.
412.70 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3307

	Scheda PROFIBUS DP Optionskarte Profibus DP, für ATV61/ATV71 This PROFIBUS DP V0 communication card is an option for variable speed drives of Altivar range. It is equipped with a 9-way female SUB-D connector. It is compatible with Altivar 61 and Altivar 71. It enables integration of your variable speed drive in your process control network. It weighs 300g. This PROFIBUS DP V0 communication card is an option for variable speed drives of Altivar range. It is equipped with a 9-way female SUB-D connector. It is compatible with Altivar 61 and Altivar 71. It enables integration of your variable speed drive in your process control network. It weighs 300g.
439.20 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3401

	Scheda Encoder RS422 5V Encoder-Interfacekarte mit RS422-kompatiblen Differenzausgängen, 5 V DC This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71. This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
261.90 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3407

	Scheda Encoder push pull 24V Encoder-Interfacekarte mit Gegentakt-Ausgängen (push-pull), 24 V DC This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with push-pull outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71. This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with push-pull outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
261.90 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3409

	Scheda Encoder universale Universal-Encoder-Interfacekarte, 5 V This universal encoder interface card is an option for variable speed drives of Altivar range. It is compatible with Altivar 71. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 200g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive. This universal encoder interface card is an option for variable speed drives of Altivar range. It is compatible with Altivar 71. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 200g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
261.90 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A3420

	Scheda encoder digitale ATV340/ATV900 - 5/12 V Digital-Encoder-Schnittstellenmodul 5/12 V This digital encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weights 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive. This digital encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
367.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3422

	Scheda encoder analogica ATV340/ATV900 Analog-Encoder-Schnittstellenmodul This analog encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female high density SUB-D 15 connector. This analog encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female high density SUB-D 15 connector.
367.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3423

	Scheda resolver ATV340/ATV900 Schnittstellenmodul für Encoder mit Istwertrückführung This resolver encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female SUB-D 9 connector. This resolver encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female SUB-D 9 connector.
367.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3424

	Scheda encoder HTL 12/15/24V HTL-Encoder-Schnittstellenmodul This HTL encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive. This HTL encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
367.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3607

	Scheda Profibus ATV32/ATV320/ATV340/ATV6xx/ATV9xx Kommunikationskarte Profibus This PROFIBUS DP V1 communication module is an option for variable speed drives of Altivar range. It is equipped with 1 x 9-way female SUB-D connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 140g. This PROFIBUS DP V1 communication module is an option for variable speed drives of Altivar range. It is equipped with 1 x 9-way female SUB-D connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 140g.
319.10 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3608

	Modulo comunicazione CANopen - 2 RJ45 - ATV32/ATV320/ATV340/ATV6xx/ATV9xx Kommunikationskarte CANopen 2 x RJ45 This CANopen Daisy chain communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. This CANopen Daisy chain communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network.
179.00 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3609

	Scheda Devicenet ATV32/ATV320/ATV340/ATV6xx/ATV9xx Kommunikationskarte DeviceNet This DeviceNet communication module is an option for variable speed drives of Altivar range. It is equipped with a 5-way removable screw connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 300g. This DeviceNet communication module is an option for variable speed drives of Altivar range. It is equipped with a 5-way removable screw connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 300g.
319.10 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3618

	Scheda CANopen SUB-D9 ATV32/ATV320/ATV340/ATV6xx/ATV9xx Kommunikationskarte CANopen SUB-D9 This CANopen communication module is an option for variable speed drives of Altivar range. It is equipped with a 9-way male SUB-D connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. This CANopen communication module is an option for variable speed drives of Altivar range. It is equipped with a 9-way male SUB-D connector. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network.
179.00 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A3721

	Modulo di comunicazione ModbusTCP Eth ATV600 Multipompa Ethernet/IP, ModbusTCP, MultiDrive-Link Kommunikationskarte - 2RJ 45 This EtherNet/IP, Modbus TCP, and MD-Link dual port module communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weights 20g. This EtherNet/IP, Modbus TCP, and MD-Link dual port module communication module is an option for variable speed drives of Altivar range. It is equipped with 2 RJ45 connectors. It is compatible with Altivar Machine and Altivar Process drives. It enables integration of your variable speed drive in your process control network. It weighs 20g.
903.80 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A4406

	Filtro EMC footprint T6 EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 90A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 90A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 15kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 90A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 15kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
1151.00 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A4407

	Filtro EMC footprint T7A EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 92A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 92A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 17kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 92A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 17kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
1357.30 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A4408

	Filtro EMC footprint T7B-T8 EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 180A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 180A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 40kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 180A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 40kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
2326.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A4423

	Filtro EMC aggiuntivo - 25 A - 3 fase EMV-Filter, 25A, 3-phasig This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 25A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C2, C3. It weighs 0.775kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems. This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 25A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C2, C3. It weighs 0.775kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
306.60 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A4555

	Induttanza di linea - 0,5 mH - 60 A Netzdrossel, 0,5mH, 60A, für Frequenzumrichter This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 60A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.5mH. It weighs 11kg and its dimensions are, 180mm wide, 210mm high, 165mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases. This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 60A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.5mH. It weighs 11kg and its dimensions are, 180mm wide, 210mm high, 165mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
980.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A4556

	Induttanza di linea - 0,3 mH - 100 A Netzdrossel, 0,3mH, 100A, für Frequenzumrichter This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 107A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.3mH. It weighs 16kg and its dimensions are, 270mm wide, 210mm high, 180mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases. This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 107A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.3mH. It weighs 16kg and its dimensions are, 270mm wide, 210mm high, 180mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
1210.80 CHF

Ø 7 - 15 jours ouvrables (*)


Schneider Electric VW3A46119

	Filtro passivo 450A 400V 50HZ Passivfilter, 450A, 400 V, 50 Hz, für Frequenzumrichter This passive filter is an option for variable speed drives of Altivar range. Its rated current is equal to 450A. It is used as an input filter in order to obtain total harmonic distortion of less than 10% or 5%. Its protection index is IP20. It weighs 205kg and its dimensions are, 468mm wide, 900.06mm high, 510mm deep. It is designed to be used for drives in the first environment (restricted distribution, domestic applications). This passive filter is an option for variable speed drives of Altivar range. Its rated current is equal to 450A. It is used as an input filter in order to obtain total harmonic distortion of less than 10% or 5%. Its protection index is IP20. It weighs 205kg and its dimensions are, 468mm wide, 900.06mm high, 510mm deep. It is designed to be used for drives in the first environment (restricted distribution, domestic applications).
19647.36 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A5103

	Induttanza motore 90A Motordrossel, 90A, für Frequenzumrichter This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current is equal to 90A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 10kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current is equal to 90A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 10kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current.
714.80 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A5104

	Induttanza motore 215A (x3) Motordrossel, 215A, für Frequenzumrichter- Verpackungseinheit: 3 Stck. This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 215A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 15.5kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3. This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 215A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 15.5kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3.
1037.60 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A5106

	Induttanza motore 481A (X3) Motordrossel, 481A, für Frequenzumrichter ATV61/ATV71, IP00 This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 481A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 58 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3. This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 481A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 58 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3.
3252.50 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A5107

	Induttanza motore 759A (X3) Motordrossel, 759A, für Frequenzumrichter ATV61/ATV71, IP00 This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 759A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 93 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 759A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 93 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current.
4402.20 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A5209

	Filtro sinus per variatore di velocità 400A Sinusfilter, 400A, für Frequenzumrichter This sinus filter is an option for variable speed drives of Altivar range. Its rated current is equal to 400A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 190kg. It is used for applications requiring long cable runs, motors connected in parallel, submersible pumps sensitive to dv/dt, an intermediate transformer between the drive and the motor. This sinus filter is an option for variable speed drives of Altivar range. Its rated current is equal to 400A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 190kg. It is used for applications requiring long cable runs, motors connected in parallel, submersible pumps sensitive to dv/dt, an intermediate transformer between the drive and the motor.
16134.23 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7101

	Unità di frenatura 200KW 300HP per variatore di velocità Bremswiderstandsmodul, 200 kW, 300 HP, für Frequenzumrichter This braking unit is an option for variable speed drives of Altivar range. The minimum resistor value to associate is 1Ohm. This braking unit allows Altivar 71 drives to operate while braking to a standstill or during “generator” operation, by dissipating the energy in the braking resistor. Its protection index is IP20. Thermal protection is provided by an integrated temperature probe. It weighs 30kg. This braking unit is an option for variable speed drives of Altivar range. The minimum resistor value to associate is 1Ohm. This braking unit allows Altivar 71 drives to operate while braking to a standstill or during “generator” operation, by dissipating the energy in the braking resistor. Its protection index is IP20. Thermal protection is provided by an integrated temperature probe. It weighs 30kg.
6845.00 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7102

	Unità di frenatura 400KW 600HP per variatore di velocità Bremswiderstandsmodul, 785 V DC+/- 1 % This braking unit is an option for variable speed drives of Altivar range. The minimum resistor value to associate is 0.7Ohm. This braking unit allows Altivar 71 drives to operate while braking to a standstill or during “generator” operation, by dissipating the energy in the braking resistor. Its protection index is IP20. Thermal protection is provided by an integrated temperature probe. It weighs 80kg. This braking unit is an option for variable speed drives of Altivar range. The minimum resistor value to associate is 0.7Ohm. This braking unit allows Altivar 71 drives to operate while braking to a standstill or during “generator” operation, by dissipating the energy in the braking resistor. Its protection index is IP20. Thermal protection is provided by an integrated temperature probe. It weighs 80kg.
12219.98 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7105

	Unità frenatura - 100 kW - 400/480 V - per variatore di velocità Bremsmodul, 100 kW, 400/480V, für Frequenzumrichter Bremsmodul für Frequenzumrichter ATV930C11N4C - C16N4C. Kontinuierliche Leistung 100 kW, maximale Leistung 160 kW, Verluste bei Dauerleistung 400 WAnteil der Leitungszeit 5 % bei 320 kW, 15 % bei 250 kW, 50 % bei 200 kWMindest-Widerstandswert 2 ?. Versorgungsspannung 380-480 V 50/60 Hz. Kabel (Umrichter- Bremsmodul), Querschnitt 2 x 120 mm², Maximale Länge 5 m. Kabel (Bremsmodul- Widerstände), Querschnitt 2 x 120 mm², Maximale Länge 5 m. Bremsmodule gestatten Altivar Prozess-Frequenzumrichtern den Betrieb während des Bremsens bis zum Stillstand oder im -Generator-Betrieb durch Ableitung der Energie in den Bremswiderstand. Bremsmodule bieten die Schutzart IP 20. Thermischer Schutz erfolgt durch einen integrierten Temperaturfühler. Anwendungsbereiche Maschinen mit großem Massenträgheitsmoment, Maschinen mit langsamen und schnellen Zyklen, vertikale Bewegungen ausführende Hochleistungsmaschinen. This braking unit is an option for variable speed drives of Altivar range. The minimum resistor value to associate is 2.5Ohm. This braking unit allows Altivar 71 drives to operate while braking to a standstill or during “generator” operation, by dissipating the energy in the braking resistor. Its protection index is IP20. Thermal protection is provided by an integrated temperature probe. It weighs 28kg.
4842.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7608R07

	braking resistor - 100 Ohm - 100 W - cable 0.75 m - IP65 Bremswiderstand, 100Ohm, 100 W, f. Lexium 15, Kabel 0,75m, IP20 This braking resistor allows your drive to operate while braking to a standstill or during slowdown braking. It dissipates the braking energy, and enables maximum transient braking torque. It has an Ohmic value of 72Ohms and a cable length of 0.75m. Its protection index is IP65. It is compatible with Altivar Machine ATV320. This braking resistor allows your drive to operate while braking to a standstill or during slowdown braking. It dissipates the braking energy, and enables maximum transient braking torque. It has an Ohmic value of 72Ohms and a cable length of 0.75m. Its protection index is IP65. It is compatible with Altivar Machine ATV320.
369.60 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7704

	Resistenza di frenatura - 14 OHM 1000W IP20 Bremswiderstand, IP 20, 15Ohm, 1000 W This braking resistor allows your drive to operate while braking to a standstill or during slowdown braking. It dissipates the braking energy, and enables maximum transient braking torque. It has an Ohmic value of 15Ohms at 20°C and its protection index is IP20. It is compatible with Altivar 312, Altivar 61, Altivar 71, Lexium 32 / 32i and lexium 52. This braking resistor allows your drive to operate while braking to a standstill or during slowdown braking. It dissipates the braking energy, and enables maximum transient braking torque. It has an Ohmic value of 15Ohms at 20°C and its protection index is IP20. It is compatible with Altivar 312, Altivar 61, Altivar 71, Lexium 32 / 32i and lexium 52.
1086.40 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7730

	Resistenza di frenatura - 100 ohms - 0,1 kW - IP20 Bremswiderstand, 100Ohm, 0,1 kW, IP20 This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 100Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 1.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 100Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 1.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
143.00 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7731

	Resistenza di frenatura - 60 ohm - 0,16 kW - IP20 Bremswiderstand, 60Ohm, 0,16 kW, IP20 This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 60Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 2kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 60Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 2kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
161.10 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7732

	Resistenza di frenatura - 28 ohm - 0.3 kW - IP20 Bremswiderstand, 28Ohm, 0,3 kW, IP20 This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 28Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 3kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 28Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 3kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
238.70 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7733

	Resistenza di frenatura - 16 ohm - 1,1 kW - IP20 Bremswiderstand, 16Ohm, 1,1 kW, IP20 Bremswiderstand, für Umrichter ATV930U55M3 - U75M3, ATV930D18N4 - D30N4, ATV950D18N4 - D30N4, ATV950D18N4E - D30N4E. Referenzwerte für einen leichten Bremszyklus. Leistung VA 1,1 kW, Schutzart IP20, Widerstand 16 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 0,8 s Bremsen bei einem Bremsmoment von 1,2 Tn für einen Zyklus von 40 s. Hohe Überlast 0,8 s Bremsen bei einem Bremsmoment von 1,5 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. Bremswiderstände gestatten Altivar Prozess-Frequenzumrichtern den Betrieb während des Bremsens bis zum Stillstand durch Ableitung der Bremsenergie. Sie ermöglichen ein maximales transientes Bremsmoment. Bremswiderstände sind auf einen definierten Zyklus ausgelegt. Je nach Ihren eigenen Anwendungen und Zyklen können Sie diese Widerstände verwenden oder einen neuen Wert definieren. Bremswiderstände für leichte Bremszyklen für Maschinen mit Zyklen und Massenträgheit. Die Bremsleistung ist begrenzt auf 1,5 Tn für 0,8 s alle 40 s. Bremswiderstände für mittlere Bremszyklen für Maschinen mit großem Massenträgheitsmoment und Fördersystemen. Die Bremsleistung ist begrenzt auf 1,35 Tn für 4 s alle 40 s. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 16Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 4kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
449.20 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7741

	Resistenza di frenatura - 60 ohm - 0,5 kW - IP20 Bremswiderstand, 60Ohm, 0,5 kW, IP20 Bremswiderstand, für Umrichter ATV930U55N4 - U75N4, ATV950U55N4 - U75N4, ATV950U55N4E - U75N4E. Referenzwerte für einen mittleren Bremszyklus. Leistung VA 0,5 kW, Schutzart IP20, Widerstand 60 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 4 s Bremsen bei einem Bremsmoment von 1,35 Tn für einen Zyklus von 40 s. Hohe Überlast 4 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 60Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 4.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
681.80 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7742

	Resistenza di frenatura - 28 ohm - 1,1 kW - IP20 Bremswiderstand, 28Ohm, 1,1 kW, IP20 Bremswiderstand, für Umrichter ATV930D11N4 - D15N4,ATV950D11N4 - D15N4, ATV950D11N4E - D15N4E. Referenzwerte für einen mittleren Bremszyklus. Leistung VA 1,1 kW, Schutzart IP20, Widerstand 28 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 4 s Bremsen bei einem Bremsmoment von 1,35 Tn für einen Zyklus von 40 s. Hohe Überlast 4 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 28Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 4kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
1020.30 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7743

	Resistenza di frenatura - 16 ohm - 2,2 kW - IP20 Bremswiderstand, 16Ohm, 2,2 kW, IP20 Bremswiderstand, für Umrichter ATV930D18N4 - D30N4, ATV950D18N4 - D30N4, ATV950D18N4E - D30N4E. Referenzwerte für einen mittleren Bremszyklus. Leistung VA 2,2 kW, Schutzart IP20, Widerstand 16 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 4 s Bremsen bei einem Bremsmoment von 1,35 Tn für einen Zyklus von 40 s. Hohe Überlast 4 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 16Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 7kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
1379.30 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7744

	Resistenza di frenatura - 10 ohm - 3,4 kW - IP20 Bremswiderstand, 10Ohm, 3,4 kW, IP20 Bremswiderstand, für Umrichter ATV930D37N4 - D45N4, ATV950D37N4 - D45N4, ATV950D37N4E - D45N4E. Referenzwerte für einen mittleren Bremszyklus. Leistung VA 3,4 kW, Schutzart IP20, Widerstand 10 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 4 s Bremsen bei einem Bremsmoment von 1,35 Tn für einen Zyklus von 40 s. Hohe Überlast 4 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 10Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 11.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
1443.90 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7746

	Resistenza di frenatura - 5 ohm - 6,9 kW - IP23 Bremswiderstand, 5Ohm, 6,9 kW, IP23 Bremswiderstand, für Umrichter ATV930D75N4 - D90N4, ATV950D75N4 - D90N4, ATV950D75N4E - D90N4E. Referenzwerte für einen mittleren Bremszyklus. Leistung VA 6,9 kW, Schutzart IP23, Widerstand 5 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Standard Überlast 4 s Bremsen bei einem Bremsmoment von 1,35 Tn für einen Zyklus von 40 s. Hohe Überlast 4 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 40 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 5Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 27kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
3107.60 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7752

	Resistenza di frenatura - 28 ohm - 5,1 kW - IP23 Bremswiderstand, 28Ohm, 5,1 kW, IP23 Bremswiderstand, für Umrichter ATV930U40M3, ATV930D11N4 - D15N4, ATV950D11N4 - D15N4, ATV950D11N4E - D15N4E. Referenzwerte für einen schweren Bremszyklus (Hebeanwendungen). Leistung VA 5,1 kW, Schutzart IP23, Widerstand 28 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Hohe Überlast 54 s Bremsen bei einem Bremsmoment von 1 Tn und 6 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 120 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 28Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 25kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
1358.80 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7753

	Resistenza di frenatura - 16 ohm - 14 kW - IP23 Bremswiderstand, 16Ohm, 14 kW, IP23 Bremswiderstand, für Umrichter ATV930U75M3.ATV930D18N4-D30N4, ATV950D18N4-D30N4, ATV950D18N4E-D30N4E. Referenzwerte für einen schweren Bremszyklus (Hebeanwendungen). Leistung VA 14 kW, Schutzart IP23, Widerstand 16 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Hohe Überlast 54 s Bremsen bei einem Bremsmoment von 1 Tn und 6 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 120 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 16Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 47kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
2706.60 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7754

	Resistenza di frenatura - 10 ohm - 19 kW - IP23 Bremswiderstand, 10Ohm, 19 kW, IP23 Bremswiderstand, für Umrichter ATV930D37N4 - D45N4, ATV950D37N4 - D45N4, ATV950D37N4E - D45N4E. Referenzwerte für einen schweren Bremszyklus (Hebeanwendungen). Leistung VA 19 kW, Schutzart IP23, Widerstand 10 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Hohe Überlast 54 s Bremsen bei einem Bremsmoment von 1 Tn und 6 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 120 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 10Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 67kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
4733.10 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7755

	Resistenza di frenatura - 8 ohm - 25 kW - IP23 Bremswiderstand, 8Ohm, 25 kW, IP23 Bremswiderstand, für Umrichter ATV930D15M3, ATV930D55N4, ATV950D55N4, ATV950D55N4E. Referenzwerte für einen schweren Bremszyklus (Hebeanwendungen). Leistung VA 25 kW, Schutzart IP23, Widerstand 8 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Hohe Überlast 54 s Bremsen bei einem Bremsmoment von 1 Tn und 6 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 120 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 8Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 86kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
5849.30 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A7756

	Resistenza di frenatura - 5 ohm - 32 kW - IP23 Bremswiderstand, 5Ohm, 32 kW, IP23 Bremswiderstand, für Umrichter ATV930D22M3, ATV930D75N4, ATV950D75N4, ATV950D75N4E. Referenzwerte für einen schweren Bremszyklus (Hebeanwendungen). Leistung VA 32 kW, Schutzart IP23, Widerstand 5 ? bei20 °C. Versorgungsspannung 200-240 V oder 380-480 V 50/60 Hz. Lastfaktor für Widerstände Der Wert der durchschnittlichen Leistung, die bei 50 °C aus dem Widerstand in das Gehäuse abgeleitet werden kann. Wird bestimmt für einen Lastfaktor während des Bremsens, welcher der Mehrzahl üblicher Anwendungen entspricht. Hohe Überlast 54 s Bremsen bei einem Bremsmoment von 1 Tn und 6 s Bremsen bei einem Bremsmoment von 1,65 Tn für einen Zyklus von 120 s. Erforderliche Anzahl pro Umrichter 1. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way. This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 5Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP23. It weighs 126kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
9502.68 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A9513

	Kit montaggio incasso T12 Montagesatz f. Bündigmontage in gekapseltem Gehäuse, ATV61/ATV71 This kit can be used to mount the power section of your variable speed drive outside the enclosure. This solution considerably reduces dissipated losses in the enclosure. With this type of mounting, the maximum internal temperature in the enclosure can then reach 60°C without derating. The back of the enclosure must be drilled and cut out for this type of mounting. This kit can be used to mount the power section of your variable speed drive outside the enclosure. This solution considerably reduces dissipated losses in the enclosure. With this type of mounting, the maximum internal temperature in the enclosure can then reach 60°C without derating. The back of the enclosure must be drilled and cut out for this type of mounting.
1110.10 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3A9514

	Kit montaggio incasso T13 SENZA UNITÀ DI Montagesatz f. Bündigmontage in gekapseltem Gehäuse, ATV61/ATV71 This kit can be used to mount the power section of your variable speed drive outside the enclosure. This solution considerably reduces dissipated losses in the enclosure. With this type of mounting, the maximum internal temperature in the enclosure can then reach 60°C without derating. The back of the enclosure must be drilled and cut out for this type of mounting. This kit can be used to mount the power section of your variable speed drive outside the enclosure. This solution considerably reduces dissipated losses in the enclosure. With this type of mounting, the maximum internal temperature in the enclosure can then reach 60°C without derating. The back of the enclosure must be drilled and cut out for this type of mounting.
1129.00 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3G48101

	Terminale remoto - ATS48 - Per avv. progr. motore asincrono Dezentrales Bedienterminal für ATS48 This terminal is an accessory of soft start / soft stop Altistart 48 range. It enables the human machine interface of the Altistart 48 soft start/soft stop unit to be positioned remotely on the door of an enclosure. It is equipped with a 3m connection cable, with 9-way SUB-D connectors at the terminal end and RJ45 at the Altistart 48 end. It weighs 200g. It is used to set and configure the soft start/soft stop unit remotely and display the soft start/soft stop unit status and detected errors remotely. This terminal is an accessory of soft start / soft stop Altistart 48 range. It enables the human machine interface of the Altistart 48 soft start/soft stop unit to be positioned remotely on the door of an enclosure. It is equipped with a 3m connection cable, with 9-way SUB-D connectors at the terminal end and RJ45 at the Altistart 48 end. It weighs 200g. It is used to set and configure the soft start/soft stop unit remotely and display the soft start/soft stop unit status and detected errors remotely.
268.50 CHF

Ø 3 - 7 jours ouvrables (*)


Schneider Electric VW3SKLN006H010E

	line choke for variable speed drive, 1p, 6A, 10mH, 230 Netzdrossel für Frequenzumrichter, 1p, 6A, 10mH, 230 This single phase line choke can be used to provide improved protection against overvoltages on the line supply. It can also be used to reduce harmonic distortion of the current produced by the variable speed drive. Its rated current is equal to 6A and its value of inductance to 10mH. This single phase line choke can be used to provide improved protection against overvoltages on the line supply. It can also be used to reduce harmonic distortion of the current produced by the variable speed drive. Its rated current is equal to 6A and its value of inductance to 10mH.
137.20 CHF