Unsere Produkte

Produkte

>

Andere Produkte

>

Artikel in Bearbeitung

Artikel in Bearbeitung

Ø 7 - 15 Arbeitstage (*)


Schneider Electric PRA90043


12.20 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A1113

	BASIS DISPLAY BASIS DISPLAY Altivar - terminal graphique de base déportable This plain text terminal is an option for variable speed drives of Altivar range. It is a dialogue option for the variable speed drive. Its protection index is IP21. The plain text display terminal can be connected and mounted on the front of the drive. Its maximum operating temperature is 50 °C. It provides a pixel resolution of 128 x 64 pixels. It weighs 200g. It is used to control, adjust, and configure the drive, display current values (motor, I/O, and machine data), store and download configurations (several configurations can be stored) and duplicate the configuration of one to another drive. A remote mounting kit for mounting on enclosure door with IP43 degree of protection is available as accessory, to be ordered separately.
158.80 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A31101

	Dezentrales Bedienterminal, f. Schrittmotorverstärker, Frequenzumrichter ATV31 Dezentrales Bedienterminal, f. Schrittmotorverstärker, Frequenzumrichter ATV31 Altivar - terminal télécommandé - pour moteur pas à pas - pour ATV31 This 4-digit display terminal is an option for variable speed drives of Altivar range and servo drives of Lexium range. It is a dialogue option for the variable speed drive or servo drive. Its protection index is IP65. This terminal can be mounted on an enclosure door. It is supplied with a cordset equipped with 2 connectors, a seal and screws. It weighs 380g. It is used to show the drive states, faults and parameter values of the drive. The navigation buttons are used to navigate through the menus, modify values and enter the main settings.
310.80 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A3401

	Encoder-Interfacekarte mit RS422-kompatiblen Differenzausgängen, 5 V DC Encoder-Interfacekarte mit RS422-kompatiblen Differenzausgängen, 5 V DC Altivar - carte d'interface de codeur - avec sorties diff. compat. RS422 - 5Vcc This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with RS 422 differential outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
261.90 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A3407

	Encoder-Interfacekarte mit Gegentakt-Ausgängen (push-pull), 24 V DC Encoder-Interfacekarte mit Gegentakt-Ausgängen (push-pull), 24 V DC Altivar - carte d'interface de codeur - avec sorties push-pull - 24Vcc This encoder interface card can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. It is compatible with push-pull outputs encoder technology. This card is simple to install and remove, it is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar 61 and Altivar 71.
261.90 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A3409

	Universal-Encoder-Interfacekarte, 5 V Universal-Encoder-Interfacekarte, 5 V Altivar - carte d'interface de codeur - universel - 5V This universal encoder interface card is an option for variable speed drives of Altivar range. It is compatible with Altivar 71. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 200g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
261.90 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A3420

	Digital-Encoder-Schnittstellenmodul 5/12 V Digital-Encoder-Schnittstellenmodul 5/12 V Altivar - interface codeur logique - 5/12V This digital encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
367.90 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A3422

	Analog-Encoder-Schnittstellenmodul Analog-Encoder-Schnittstellenmodul MODULE CODEUR ANALOGIQUE CARTE ELECTRONI This analog encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female high density SUB-D 15 connector.
367.90 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A3423

	Schnittstellenmodul für Encoder mit Istwertrückführung Schnittstellenmodul für Encoder mit Istwertrückführung MODULE INTERFACE RESOLVEU R CARTE ELECTRO This resolver encoder interface module can be used for Flux Vector Control operation with sensor for asynchronous motors. It can also be used for Vector Control operation with speed feedback for synchronous motors. It improves drive performance irrespective of the motor load state. This module is inserted in a dedicated slot of the variable speed drive. It is protected against encoder supply short circuits and overloads. It is compatible with Altivar Process ATV900 and Modular, and Altivar Machine ATV340. It has 1 female SUB-D 9 connector.
367.90 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A3424

	HTL-Encoder-Schnittstellenmodul HTL-Encoder-Schnittstellenmodul Altivar - option codeur sortie Push Pull This HTL encoder interface module is an option for variable speed drives of Altivar range. It is compatible with Altivar Machine ATV340 and Altivar Process ATV900 drives. It improves drive performance irrespective of the motor load state, zero speed torque, accurate speed regulation, torque accuracy, shorter response times on a torque surge, improved dynamic performance in transient state. It is protected against short circuits and overloads. It weighs 150g. It is used for Flux Vector Control operation with sensor (FVC mode) for asynchronous motors, or for Vector Control operation with speed feedback (FSY mode) for synchronous motors. It is inserted in a dedicated slot of the drive.
367.90 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A4406

	EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 90A EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 90A Altivar - filtre d'entrée CEM supplémentaire - alimentation triphasée - 90A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 90A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 15kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
1151.00 CHF

Ø 7 - 15 Arbeitstage (*)


Schneider Electric VW3A4407

	EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 92A EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 92A Altivar - filtre d'entrée CEM supplémentaire - alimentation triphasée - 92A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 92A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 17kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
1357.30 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A4408

	EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 180A EMV-Filter, zusätzlich, Spannungsversorgung, 3-phasig, 180A Altivar - filtre d'entrée CEM supplémentaire - alimentation triphasée - 180A This EMC filter is an option for variable speed drives of Altivar range and servo drives of Lexium range. Its rated current is equal to 180A. It is used to reduce conducted emissions on the line supply below the limits of standards EN 55011 group 1, class A or B, and IEC/EN 61800-3 category C1, C2. Its protection index is IP20. It weighs 40kg. This additional EMC filter can only be used on TN (neutral connection) and TT (earthed neutral) type systems.
2326.90 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A4555

	Netzdrossel, 0,5mH, 60A, für Frequenzumrichter Netzdrossel, 0,5mH, 60A, für Frequenzumrichter Altivar - inductance de ligne - 0,5mH - 60A - pour variateur de vitesse This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 60A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.5mH. It weighs 11kg and its dimensions are, 180mm wide, 210mm high, 165mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
980.90 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A4556

	Netzdrossel, 0,3mH, 100A, für Frequenzumrichter Netzdrossel, 0,3mH, 100A, für Frequenzumrichter Altivar - inductance de ligne - 0,3mH - 100A - pour variateur de vitesse This line choke is an option for variable speed drives of Altivar range. Its rated current is equal to 107A. It provides improved protection against overvoltages on the line supply and contributes to reduce harmonic distortion of the current produced by the drive. Its protection index is IP00. It has an inductance value of 0.3mH. It weighs 16kg and its dimensions are, 270mm wide, 210mm high, 180mm deep. Its use is particularly recommended in case of close connection of several drives in parallel, line supply with significant disturbance from other equipment (interference, overvoltages), line supply with voltage imbalance between phases.
1210.80 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A5104

	Motordrossel, 215A, für Frequenzumrichter- Verpackungseinheit: 3 Stck. Motordrossel, 215A, für Frequenzumrichter- Verpackungseinheit: 3 Stck. Altivar - inductance moteur - 215A - pour variateur de vitesse - lot de 3 This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 215A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 15.5kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3.
1037.60 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A5106

	Motordrossel, 481A, für Frequenzumrichter ATV61/ATV71, IP00 Motordrossel, 481A, für Frequenzumrichter ATV61/ATV71, IP00 Altivar - inductance moteur - 481A - pour variateur vitesse ATV61/ATV71 - IP00 This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 481A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 58 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current. It is sold in indivisible quantity of 3.
3252.50 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A5107

	Motordrossel, 759A, für Frequenzumrichter ATV61/ATV71, IP00 Motordrossel, 759A, für Frequenzumrichter ATV61/ATV71, IP00 Altivar - inductance moteur - 759A - pour variateur vitesse ATV61/ATV71 - IP00 This motor choke is an option for variable speed drives of Altivar 61 / Altivar 71 range. Its rated current equal to 759A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 93 kg. It is used to limit overvoltages at the motor terminals, filter interference and reduce motor earth leakage current.
4402.20 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A5209

	Sinusfilter, 400A, für Frequenzumrichter Sinusfilter, 400A, für Frequenzumrichter Altivar - filtre sinus - 400A - pour variateur de vitesse This sinus filter is an option for variable speed drives of Altivar range. Its rated current is equal to 400A. It is used as an output filter (between drive output and motor) and enables your variable speed drive to run with motor cables longer than the maximum permitted lengths. Its protection index is IP00. It weighs 190kg. It is used for applications requiring long cable runs, motors connected in parallel, submersible pumps sensitive to dv/dt, an intermediate transformer between the drive and the motor.
16134.23 CHF

Ø 3 - 7 Arbeitstage (*)


Schneider Electric VW3A7730

	Bremswiderstand, 100Ohm, 0,1 kW, IP20 Bremswiderstand, 100Ohm, 0,1 kW, IP20 Altivar - résistance de freinage - 100ohms - 0,1kW - IP20 This braking resistor is an option for variable speed drives of Altivar range. It has an Ohmic value of 100Ohms at 20°C. This braking resistor allows your variable speed drive to operate while braking to a standstill, by dissipating the braking energy and enables maximum transient braking torque. Its protection index is IP20. It weighs 1.5kg. This resistor is designed to be mounted on the outside of the enclosure, but should not inhibit natural cooling, air inlets and outlets must not be obstructed in any way.
143.00 CHF

ÜBER UNS

PRODUKTE

SUPPORT UND SERVICE

UNSERE PARTNER

Unternehmen
Kundenspezifische
Anpassungen
Kontakt
Offene Stellen

+41 (0)56 222 38 18
mailbox@sentronic.com

Sensoren
Automation
Komponenten, Halbfabrikate
Verteilen, Verdrahten
Ex Zone

AKTUELLES
News
OEM Antrag stellen

Abrufaufträge
Beratung mit über 30-jähriger Erfahrung
Ihre Anforderung, unsere Lösung
Mustergeräte

Sensor KnowHow

Software Download

Lieferbare Second Source Lösungen

Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System

(*) Auf Grund der weltweiten Ressourcenprobleme kann es bei den angegebenen Lieferfristen zu Abweichungen kommen!