SENTRONIC AG | RFiD Sicherheitsschalter, Sicherheitsmagnetschalter, Sicherheitstürschalter

Datenschutzeinstellungen

Unsere Website verwendet Cookies sowie Third-Party-Inhalte und Cookies auch von außerhalb der EU, zu Statistik- und Werbezwecken, um Inhalte zu personalisieren, aber auch um eine bessere User-Experience zu erreichen. Einige davon sind aus technischer Sicht essentiell, manche sind optional. Stimme bitte zu:

Technisch essentielle Cookies
Analytics Cookies
Marketing Cookies
Personalisierte Cookies
zurück

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Unsere Allgemeinen Geschäftsbedingungen AGB


Inhalte:
SENTRONIC AG überprüft und aktualisiert ständig die Informationen auf der Webseite. Trotzdem können sich die Informationen inzwischen verändert haben. Eine Haftung oder Garantie für Aktualität, Richtigkeit und Vollständigkeit der zur Verfügung gestellten Informationen und Daten kann daher nicht übernommen werden.

Änderungen: SENTRONIC AG behält sich das Recht vor, Änderungen oder Ergänzungen der bereitgestellten Informationen ohne vorherige Ankündigung vorzunehmen.

Links: Die Webseite der SENTRONIC AG enthält Links zu anderen Websites. SENTRONIC AG ist für den Inhalt dieser Websites nicht verantwortlich.










zurück
zurück

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

zurück

Einwilligung zur Datenverarbeitung für KI-Chatbot

Bitte lesen Sie diese Bedingungen sorgfältig durch, bevor Sie unseren Chatbot nutzen. Durch die Nutzung des Chatbots erklären Sie sich mit diesen Bedingungen einverstanden.

1. Chatbot-Service

Unser Chatbot-Service wird bereitgestellt, um Sie auf zwei Arten zu unterstützen:

  • Lernunterstützung: Um Fragen zum Inhalt Ihrer gebuchten Produkte zu beantworten und Ihren Lernprozess zu unterstützen.
  • Einkaufsassistent: Um Ihnen bei Ihren Anfragen zu helfen und Informationen über unsere Produkte und Dienstleistungen bereitzustellen.

Der Chatbot wird von der Gemini-Technologie von Google betrieben.

2. Datenverarbeitung und Übermittlung in die USA

  • Verantwortlicher: Der Websitebetreiber, wie im Impressum dieser Website definiert, ist der Verantwortliche für die über diesen Chatbot verarbeiteten personenbezogenen Daten.
  • Auftragsverarbeiter: Google LLC mit Sitz in den Vereinigten Staaten fungiert in unserem Auftrag als Auftragsverarbeiter.
  • Datenübermittlung: Durch die Nutzung dieses Chatbots erkennen Sie an und stimmen zu, dass Ihre personenbezogenen Daten, einschließlich des Inhalts Ihrer Chat-Konversationen, an Google in den Vereinigten Staaten übermittelt und dort verarbeitet werden. Eine Übermittlung findet nur statt, wenn Sie eine Anfrage an den Chatbot senden. Das bloße Laden des Chatbots überträgt keine Daten.
  • Datenspeicherung: Die Chat-Konversationen werden ausschließlich auf unseren Servern in Deutschland gespeichert, das Teil der Europäischen Union ist. Google verarbeitet als unser Auftragsverarbeiter die Daten ausschließlich zur Bereitstellung der Chatbot-Funktionalität; Google speichert die Chat-Konversationen nicht auf seinen Servern für eigene Zwecke, die über die zur Betreibung des Chatbots erforderliche unmittelbare Verarbeitung hinausgehen.
  • Rechtsgrundlage für die Übermittlung: Die Datenübermittlung in die USA basiert auf dem DPF: Google LLC ist unter dem EU-U.S. Data Privacy Framework zertifiziert. Diese Zertifizierung deckt die spezifischen Datenverarbeitungsaktivitäten dieses Chatbots ab.
  • Zwecke der Datenverarbeitung: Ihre Daten werden für die folgenden Zwecke verarbeitet:
    • Um Ihnen den Chatbot-Service bereitzustellen und Ihre Anfragen zu beantworten (sowohl im Lern- als auch im Einkaufsbereich).
    • Um die Qualität und Funktionalität des Chatbots zu verbessern.
    • Um die Bedürfnisse der Nutzer zu verstehen und unsere Produkte, Dienstleistungen und Kurse zu verbessern.
  • Datenminimierung: Wir werden nur die Daten erheben und verarbeiten, die für die oben genannten Zwecke unbedingt erforderlich sind.
  • Datensicherheit: Wir setzen geeignete technische und organisatorische Maßnahmen ein, um Ihre Daten zu schützen. Bitte beachten Sie jedoch, dass die Datenübertragung über das Internet nicht vollständig sicher ist.

3. Risiken der Datenübermittlung

Wir schätzen die Vereinigten Staaten von Amerika, aber die Europäische Union ist der Ansicht, dass sie möglicherweise nicht das gleiche Datenschutzniveau wie die Europäische Union bieten. Indem Sie diesen Bedingungen zustimmen, erkennen Sie an, dass mit der Übermittlung Ihrer Daten in die USA potenzielle Risiken verbunden sind, einschließlich der Möglichkeit des Zugriffs durch US-amerikanische Regierungsbehörden.

4. Ihre Einwilligung

Indem Sie unten auf "Ich stimme zu" klicken, erklären Sie sich ausdrücklich mit der Verarbeitung Ihrer personenbezogenen Daten gemäß diesen Bedingungen einverstanden, einschließlich der Übermittlung an Google in den Vereinigten Staaten. Sie bestätigen, dass Sie diese Bedingungen gelesen und verstanden haben.

5. Widerruf der Einwilligung

Sie haben das Recht, Ihre Einwilligung jederzeit zu widerrufen. Der Widerruf Ihrer Einwilligung verhindert die weitere Verarbeitung Ihrer Daten im Chatbot. Um Ihre Einwilligung zu widerrufen, klicken Sie einfach auf den Link "AI Privacy" in unserem Chatbot.

zurück

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Unsere Allgemeinen Geschäftsbedingungen AGB


Inhalte:
SENTRONIC AG überprüft und aktualisiert ständig die Informationen auf der Webseite. Trotzdem können sich die Informationen inzwischen verändert haben. Eine Haftung oder Garantie für Aktualität, Richtigkeit und Vollständigkeit der zur Verfügung gestellten Informationen und Daten kann daher nicht übernommen werden.

Änderungen: SENTRONIC AG behält sich das Recht vor, Änderungen oder Ergänzungen der bereitgestellten Informationen ohne vorherige Ankündigung vorzunehmen.

Links: Die Webseite der SENTRONIC AG enthält Links zu anderen Websites. SENTRONIC AG ist für den Inhalt dieser Websites nicht verantwortlich.










zurück
zurück

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

zurück
DEU | ENG | FRA
Anmelden
Erkennen
Optische Sensoren, Induktive Sensoren, Kapazitive Sensoren, Ultraschall Sensoren, Etiketten Sensoren
Messen
Optische Mess Systeme, Drehgeber / Encoder, IR Temperatur Sensoren, Druck-/ Vakuum Sensoren, Staudruckschalter
Mechanisch schalten
Positionsschalter, Endlagenschalter
Werte erfassen
Personenzählung, Anwesenheitserfassung, Temperaturdatenerfassung, Feuchtedatenerfassung, Leckagen, Füllstände
Trennen & Schalten
Halbleiterrelais, Halbleiterschütze, Schaltschütze, Schaltrelais, Motorschutzschalter, Motorschutzrelais, Wendeschütze, Installationsgeräte
Automation
Kleinsteuerungen, Zeitrelais, Überwachungsrelais, Sicherheitsrelais, Halbleiterrelais, Optokoppler, Zähler, Temperatur Regler, Transmitter, Netzteile, Anzeigegeräte, Motoren
Bedienen & Anzeigen
Drucktaster, Drehschalter, Touchpanels, Bargraph Anzeigen, Prozessanzeigen, Leer- und Komplettgehäuse
Klimatechnik
Klimatransmitter, Datenlogger, Flüssigmanometer, Handmessgeräte, Messsonden
Verteilen, Verdrahten
Anschlusskabel, Verlängerungskabel, PVC+ Kabel, PUR Kabel, Stecker, Buchsen, Kundenspezifische Anschlusskabel
Ex Zone
Ex Sensoren, Ex Taster, Ex Durchführungen, Gekapselte Gehäuse, Ex Pneumatik, Ex Wandler, Ex Anlagen, Ex Transmitter
Senior Produkte
Alte Serien, Abgekündigte Geräte, Sondergeräte
Information
User Online: 643
Counter: 85492339

Safety Magnetschalter

Türen, Klappen berührungslos überwachen

 
  Sie benötigen Hilfe bei der Wahl des richtigen Sicherheitsmagnetschalters?
Gerne berate ich Sie bei diesem sehr variablen Produkt 👍

Fabian Hauser, Verkaufsingenieur
 
 
 
Hersteller
Telemecanique (55)
Reichweite
EIN: 5 mm / AUS: 15 mm (15)
EIN: 8 mm / AUS: 20 mm (40)
Bauform
Kompakt 51 x 16 x 7 mm (15)
Standard 88 x 25 x 13 mm (30)
Zylindrisch d: 30mm (10)
Indikator
mit LED (25)
ohne (30)
Funktion
1 NC + 1 NO gestuft schaltend (20)
1 NC + 2 NO gestuft schaltend (8)
2 NC + 1 NO gestuft schaltend (8)
2x NC gestuft schaltend (19)
Anschluss
Kabel 10m (13)
Kabel 2m (15)
Kabel 5m (11)
Spezial (1)
Stecker M12, 4pol (7)
Stecker M12, 8pol (4)
Stecker M8, 4pol (4)
55 Treffer
Sortierung
Verfügbarkeit

Ø 3 - 7 Arbeitstage (*)
Telemecanique XCSDMC59010
  • sehr kompakte Bauform
  • Anschlusskabel 10m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
118.52 CHF
5 Stk sofort lieferbar
Telemecanique XCSDMC5902
  • sehr kompakte Bauform
  • Anschlusskabel 2m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
97.03 CHF
2 Stk sofort lieferbar
Telemecanique XCSDMC5905
  • sehr kompakte Bauform
  • Anschlusskabel 5m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
110.20 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC590L01M8
  • sehr kompakte Bauform
  • Anschlusstecker M8, 4pol
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M8, 4pol
114.14 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC59110
  • sehr kompakte Bauform
  • mit LED
  • Anschlusskabel 10m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
118.40 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC5912
  • sehr kompakte Bauform
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
100.96 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC5915
  • sehr kompakte Bauform
  • mit LED
  • Anschlusskabel 5m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
114.25 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMC591L01M8
  • sehr kompakte Bauform
  • mit LED
  • Anschlusstecker M8, 4pol
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M8, 4pol
117.02 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC79010
  • sehr kompakte Bauform
  • Anschlusskabel 10m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 10m
118.52 CHF
4 Stk sofort lieferbar
Telemecanique XCSDMC7902
  • sehr kompakte Bauform
  • Anschlusskabel 2m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 2m
95.65 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMC7905
  • sehr kompakte Bauform
  • Anschlusskabel 5m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 5m
109.16 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMC790L01M8
  • sehr kompakte Bauform
  • Anschlusstecker M8, 4pol
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M8, 4pol
112.97 CHF
Ø 3 - 7 Arbeitstage (*)
Telemecanique XCSDMC79110
  • sehr kompakte Bauform
  • mit LED
  • Anschlusskabel 10m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 10m
120.37 CHF
Ø 3 - 7 Arbeitstage (*)
Telemecanique XCSDMC7912
  • sehr kompakte Bauform
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 2m
100.04 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMC791L01M8
  • sehr kompakte Bauform
  • mit LED
  • Anschlusstecker M8, 4pol
  • Reichweite EIN: 5 mm / AUS: 15 mm
  • Bauform Kompakt 51 x 16 x 7 mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M8, 4pol
118.06 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP50010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 10m
123.49 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP5002
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 2m
102.81 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMP5005
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 5m
117.72 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP500L01M12
  • Anschlusstecker M12, 8pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Stecker M12, 8pol
141.28 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP50110
  • mit LED
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 10m
141.04 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP5012
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 2m
108.24 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP5015
  • mit LED
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Kabel 5m
127.65 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP501L01M12
  • mit LED
  • Anschlusstecker M12, 8pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 2 NO gestuft schaltend
  • Anschluss Stecker M12, 8pol
133.07 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP59010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
118.52 CHF
49 Stk sofort lieferbar
Telemecanique XCSDMP5902
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
92.07 CHF
285 Stk sofort lieferbar
Telemecanique XCSDMP5905
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
105.12 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP590L01M12
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M12, 4pol
108.01 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP59110
  • mit LED
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
115.05 CHF
2 Stk sofort lieferbar
Telemecanique XCSDMP5912
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
97.73 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP5915
  • mit LED
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
98.77 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP591L01M12
  • mit LED
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M12, 4pol
112.17 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP70010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
135.27 CHF
auf Anfrage
Telemecanique XCSDMP7002
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
112.74 CHF
2 Stk sofort lieferbar
Telemecanique XCSDMP7005
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
129.38 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP700L01M12
  • Anschlusstecker M12, 8pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M12, 8pol
141.51 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMP70110
  • mit LED
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
139.77 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP7012
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
112.51 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMP7015
  • mit LED
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 5m
131.57 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP701L01M12
  • mit LED
  • Anschlusstecker M12, 8pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 2 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M12, 8pol
142.32 CHF
10 Stk sofort lieferbar
Telemecanique XCSDMP79010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 10m
118.29 CHF
2 Stk sofort lieferbar
Telemecanique XCSDMP7902
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 2m
91.95 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMP7905
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 5m
102.81 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP790L01M12
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M12, 4pol
108.01 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP790L01SB6
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Spezial
143.82 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMP791L01M12
  • mit LED
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Standard 88 x 25 x 13 mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M12, 4pol
112.28 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMR59010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 10m
115.05 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR5902
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator ohne
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
97.84 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMR5912
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Kabel 2m
99.00 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR591L01M12
  • mit LED
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator mit LED
  • Funktion 1 NC + 1 NO gestuft schaltend
  • Anschluss Stecker M12, 4pol
118.75 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR79010
  • Anschlusskabel 10m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 10m
117.36 CHF
1 Stk sofort lieferbar
Telemecanique XCSDMR7902
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 2m
95.99 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR790L01M12
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator ohne
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M12, 4pol
114.59 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR7912
  • mit LED
  • Anschlusskabel 2m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 2m
102.23 CHF
2 Stk sofort lieferbar
Telemecanique XCSDMR7915
  • mit LED
  • Anschlusskabel 5m
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Kabel 5m
106.62 CHF
Ø 7 - 15 Arbeitstage (*)
Telemecanique XCSDMR791L01M12
  • mit LED
  • Anschlusstecker M12, 4pol
  • Reichweite EIN: 8 mm / AUS: 20 mm
  • Bauform Zylindrisch d: 30mm
  • Indikator mit LED
  • Funktion 2x NC gestuft schaltend
  • Anschluss Stecker M12, 4pol
112.05 CHF
 
 

ÜBER UNS

PRODUKTE SUPPORT UND SERVICE UNSERE PARTNER
 

Unternehmen
Kundenspezifische
Anpassungen

Kontakt
Offene Stellen

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG


Sensoren
Automation
Komponenten, Halbfabrikate
Verteilen, Verdrahten
Ex Zone


AKTUELLES
News
OEM Antrag stellen
Abrufaufträge
Beratung mit über 30-jähriger Erfahrung
Ihre Anforderung, unsere Lösung
Mustergeräte


Sensor KnowHow

Software Download

Lieferbare Second Source Lösungen
Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Auf Grund der weltweiten Ressourcenprobleme kann es bei den angegebenen Lieferfristen zu Abweichungen kommen!