SENTRONIC AG | Ex Limit switches

Privacy Settings

Our website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. Please agree:

Technical essential cookies
Analytics cookies
Marketing cookies
Personalized cookies
back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back

Data Processing Consent for AI Chatbot

Please read these terms carefully before using our chatbot. By using the chatbot, you agree to these terms.

1. Chatbot Service

Our chatbot service is provided to assist you in two ways:

  • Navigation: To quickly take you to the product information you require.
  • Search Assistant: To assist you with your inquiries and provide information about our products and services.

The chatbot is powered by Google's Gemini technology.

2. Data Processing and Transfer to the USA

  • Data Controller: The website operator, defined in the legal notice of this website, is the data controller for the personal data processed through this chatbot.
  • Data Processor: Google LLC, located in the United States, acts as a data processor on our behalf.
  • Data Transfer: By using this chatbot, you acknowledge and agree that your personal data, including the content of your chat conversations, will be transmitted to and processed by Google in the United States. A transfer only takes place when you sent a query to the chatbot. Simply loading the chatbot doesn’t transfer any data.
  • Data Storage: The chat conversations are stored only on our servers, located in Germany, which is part of the European Union. Google, as our data processor, only processes the data to provide the chatbot functionality; Google does not store the chat conversations on its servers for its own purposes beyond the immediate processing required to operate the chatbot.
  • Legal Basis for Transfer: The data transfer to the USA is based on DPF: Google LLC is certified under the EU-U.S. Data Privacy Framework. This certification covers the specific data processing activities of this chatbot.
  • Data Processing Purposes: Your data will be processed for the following purposes:
    • To provide you with the chatbot service and respond to your inquiries (both learning-related and shopping-related).
    • To improve the quality and functionality of the chatbot.
    • To understand user needs and improve our products, services and courses.
  • Data Minimization: We will only collect and process the data that is strictly necessary for the above purposes.
  • Data Security: We implement appropriate technical and organizational measures to protect your data. However, please be aware that data transmission over the internet is not completely secure.

3. Risks of Data Transfer

We love the United States of America, but the European Union believes that they may not provide the same level of data protection as the European Union. By agreeing to these terms, you acknowledge that there are potential risks associated with the transfer of your data to the USA, including the possibility of access by US government authorities.

4. Your Consent

By clicking "I Agree" below, you explicitly consent to the processing of your personal data as described in these terms, including the transfer to Google in the United States. You confirm you have read and understood these terms.

5. Withdrawal of Consent

You have the right to withdraw your consent at anytime. Withdrawing your consent will prevent further processing of your data in the chatbot. To withdraw your consent, just click on the “AI Privacy” link in our chatbot.

back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back
DEU | ENG | FRA
Log in
Sensors
Optical, Inductive, Capacitive, Ultrasonic, IR sensors, Labelsensors, Pressure, Vacuum, Pitot pressure switch, Level control, Mechanical switches, Temperature sensors
Capture values
People counting, presence detection, temperature data acquisition, humidity data acquisition, leakages, filling levels
Separation & Switching
Solid-state relays, Solid State Contactors, Solid State Reverse Contactors, Motor circuit breakers, Overload relays, Contactors, Reversing contactors
Automation
Controllers, PLC, Timer, Control relays, Solid state relays, Optocouplers, Counter, Temperature controls, Transmitters, Power supplies, Displays, Motors
Operating & display
Pushbuttons, rotary switches, touch panels, bargraph displays, process displays, empty and complete housings
Climate technology
Climatic transmitters, data loggers, liquid manometers, handheld instruments, measuring probes
Distribution, wiring
Connection cables, Extension cables, Jumper cables, PVC+ cables, PUR cables, Connector, Custom cables
Detect, Switch (Ex)
Exd, Exi Taster, Lichtschranken, Reflexlichtschranken, Ex Lichtleiter, Ex Mechanische Schalter
Measuring (Ex)
Ex IR Temperature Sensors, Ex Pressure switches, Ex Vacuum switches, Ex Encoder
Control, Signaling (Ex)
Ex Meldelampen, Ex Drucktaster, Ex Not-Aus Taster, Ex Schlüsselschalter, Ex Drehschalter, Ex Potentiometer, Komplette Ex Steuereinheiten
Electric regulating (Ex)
Logic controller, Timers, Control relays, Counters, Temperature controllers
Pneumatic regulating (Ex)
Logic elements, Timer, Flow restrictor, 2-hand control, Push buttons, Position detectors, Microvalve, Pressure switches
Distribution, Insertion (Ex)
Ex terminal boxes, Ex Polyester enclosures, Ex equipped enclosures, Ex empty enclosures, Ex linebushings
Protecting, Monitoring (Ex)
Ex Safety switches, Ex magnetic switches, Ex rope pull switches, Ex Safety Rotary Encoders
Senior products
Old series, Discontinuation, Special parts
Information
User Online: 720
Counter: 85488914

>

>

>

Ex Limit switches

Ex Limit switches

Mechanical switching in an explosive atmosphere

Classification of the different Ex zones
Areas at risk of gas explosion Areas with combustible dust
Zone 0
Area in which there is a permanent or long-term explosive
atmosphere from a mixture of air with combustible
substances in the form of gas, vapour or fog.
Zone 20
Area in which explosive atmosphere is present in the form of a cloud
of combustible dust in air constantly, long-term or frequently.
Zone 1
Area in which it is expected that an explosive atmosphere will
occur from a mixture of air with combustible substances in the
form of gas, vapour or fog during normal operation.
Zone 21
Area in which it is expected that explosive atmosphere in the form
of a cloud of combustible dust in air will occasionally occur during
normal operation.
Zone 2
Area in which it is not expected that in normal operation an
explosive atmosphere from a mixture of air with combustible
substances occurs in the form of gas, vapor or fog, and if, then
only rarely and even briefly.
Zone 22
Area in which, in normal operation, it is not expected that an explosive
atmosphere in the form of a cloud of combustible dust will occur in air,
but if it does occur, then only for a short time.
Brand
Telemecanique (43)
Series
XCK J Ex (Zones 21, 22) (6)
XCK M Ex (Zones 21, 22) (5)
XCK MR Ex (Zones 21, 22) (2)
XCK D Ex (Zones 21, 22) (13)
XCM D Ex (Zones 21, 22) (10)
XCR Ex (Zones 21, 22) (7)
Actuator
Cat’s whisker (2)
Stainless steel operating lever (1)
Galvanised steel operating lever (1)
Variable length thermoplastic roller lever, Ø 50 mm (1)
Variable length thermoplastic roller lever (4)
M12 with metal end plunger (1)
M12 Steel roller plunger (1)
M16 Metal end plunger with elastomer boot (1)
M18 with metal end plunger (1)
M18 Steel roller plunger (1)
Metal end plunger with elastomer boot (2)
Metal end plunger (6)
With cruciform metal rods, reversed head (1)
With cruciform metal rods (4)
Round rod lever, thermoplastic Ø6 mm / L: 200 mm (1)
Retractable steel roller lever plunger (1)
Large thermoplastic roller lever (Ø 50 mm) (1)
Thermoplastic roller lever plunger, horizontal actuation in 1 direction (2)
Thermoplastic roller lever plunger, vertical or horizontal actuation in 1 direction (1)
Thermoplastic roller lever plunger, vertical actuation in 1 direction (2)
Thermoplastic roller lever, Ø 50 mm (1)
Thermoplastic roller lever (10)
Steel roller lever (2)
Steel roller plunger for lateral cam approach (4)
Thermoplastic roller lever (Ø 30 mm) (1)
Metal rod, Ø6 mm (1)
Housing material
Metal (41)
Zinc alloy enclosure (2)
Function
2 changeover (NO/NC) (2)
2x NC + 1x NO (24)
2x NC + 2x NO slow break (2)
2x NC + 2x NO (17)
Circuit type
Slow break (2)
Snap action (41)
Contact material
Standard (43)
Connection
ISO M16 cable gland (13)
ISO M20 cable gland (13)
Cable 5m (10)
No 13 cable gland (7)
43 Results
Sort by
Availability

1 pcs available immediately
Telemecanique XCKD3902P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Steel roller plunger for lateral cam approach
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
190.60 CHF
1 pcs available immediately
Telemecanique XCKD3906P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Cat’s whisker
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
167.00 CHF
1 pcs available immediately
Telemecanique XCKD3910P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Metal end plunger
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
129.20 CHF
on request
Telemecanique XCKD3911P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Metal end plunger with elastomer boot
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
140.90 CHF
1 pcs available immediately
Telemecanique XCKD3918P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
136.50 CHF
1 pcs available immediately
Telemecanique XCKD3921P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever plunger, horizontal actuation in 1 direction
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
170.30 CHF
1 pcs available immediately
Telemecanique XCKD3927P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever plunger, vertical actuation in 1 direction
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
183.50 CHF
1 pcs available immediately
Telemecanique XCKD3928P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever plunger, vertical or horizontal actuation in 1 direction
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
181.40 CHF
on request
Telemecanique XCKD3939P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever, Ø 50 mm
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
196.10 CHF
1 pcs available immediately
Telemecanique XCKD3945P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Variable length thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
162.40 CHF
1 pcs available immediately
Telemecanique XCKD3949P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator Variable length thermoplastic roller lever, Ø 50 mm
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
219.90 CHF
on request
Telemecanique XCKD39H0P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator M18 with metal end plunger
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
172.00 CHF
on request
Telemecanique XCKD39H2P16EX
  • 21 - 22 (Dust)
  • Series XCK D Ex (Zones 21, 22)
  • Actuator M18 Steel roller plunger
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M16 cable gland
253.20 CHF
1 pcs available immediately
Telemecanique XCKJ390511H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
257.10 CHF
1 pcs available immediately
Telemecanique XCKJ390513H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Steel roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
245.80 CHF
1 pcs available immediately
Telemecanique XCKJ390541H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Variable length thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
262.00 CHF
1 pcs available immediately
Telemecanique XCKJ390559H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Round rod lever, thermoplastic Ø6 mm / L: 200 mm
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
258.50 CHF
on request
Telemecanique XCKJ3961H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Metal end plunger
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
239.40 CHF
4 pcs available immediately
Telemecanique XCKJ3967H29EX
  • 21 - 22 (Dust)
  • Series XCK J Ex (Zones 21, 22)
  • Actuator Steel roller plunger for lateral cam approach
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
251.50 CHF
1 pcs available immediately
Telemecanique XCKM3902H29EX
  • 21 - 22 (Dust)
  • Series XCK M Ex (Zones 21, 22)
  • Actuator Steel roller plunger for lateral cam approach
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
770.20 CHF
1 pcs available immediately
Telemecanique XCKM3906H29EX
  • 21 - 22 (Dust)
  • Series XCK M Ex (Zones 21, 22)
  • Actuator Cat’s whisker
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
749.40 CHF
1 pcs available immediately
Telemecanique XCKM3910H29EX
  • 21 - 22 (Dust)
  • Series XCK M Ex (Zones 21, 22)
  • Actuator Metal end plunger
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
663.50 CHF
1 pcs available immediately
Telemecanique XCKM3915H29EX
  • 21 - 22 (Dust)
  • Series XCK M Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
700.30 CHF
6 pcs available immediately
Telemecanique XCKM3921H29EX
  • 21 - 22 (Dust)
  • Series XCK M Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever plunger, horizontal actuation in 1 direction
  • Housing material Metal
  • Function 2x NC + 1x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection ISO M20 cable gland
792.80 CHF
Ø 15 - 25 working days (*)
Telemecanique XCKMR54D1H29EX
  • 21 - 22 (Dust)
  • Series XCK MR Ex (Zones 21, 22)
  • Actuator With cruciform metal rods
  • Housing material Metal
  • Function 2x NC + 2x NO slow break
  • Circuit type Slow break
  • Contact material Standard
  • Connection ISO M20 cable gland
768.50 CHF
Ø 15 - 25 working days (*)
Telemecanique XCKMR54D2H29EX
  • 21 - 22 (Dust)
  • Series XCK MR Ex (Zones 21, 22)
  • Actuator With cruciform metal rods, reversed head
  • Housing material Metal
  • Function 2x NC + 2x NO slow break
  • Circuit type Slow break
  • Contact material Standard
  • Connection ISO M20 cable gland
791.50 CHF
1 pcs available immediately
Telemecanique XCMD4102L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Steel roller plunger for lateral cam approach
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
278.90 CHF
1 pcs available immediately
Telemecanique XCMD4110L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Metal end plunger
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
180.40 CHF
1 pcs available immediately
Telemecanique XCMD4111L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Metal end plunger with elastomer boot
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
144.10 CHF
1 pcs available immediately
Telemecanique XCMD4115L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
269.20 CHF
on request
Telemecanique XCMD4116L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Steel roller lever
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
284.20 CHF
on request
Telemecanique XCMD4124L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Retractable steel roller lever plunger
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
224.00 CHF
1 pcs available immediately
Telemecanique XCMD4145L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator Variable length thermoplastic roller lever
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
279.70 CHF
on request
Telemecanique XCMD41F0L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator M12 with metal end plunger
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
167.60 CHF
1 pcs available immediately
Telemecanique XCMD41F2L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator M12 Steel roller plunger
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
381.40 CHF
1 pcs available immediately
Telemecanique XCMD41G1L5EX
  • 21 - 22 (Dust)
  • Series XCM D Ex (Zones 21, 22)
  • Actuator M16 Metal end plunger with elastomer boot
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection Cable 5m
241.30 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRA111EX
  • 21 - 22 (Dust)
  • both contacts operate in each direction
  • Series XCR Ex (Zones 21, 22)
  • Actuator Metal rod, Ø6 mm
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
891.90 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRA151EX
  • 21 - 22 (Dust)
  • both contacts operate in each direction
  • Series XCR Ex (Zones 21, 22)
  • Actuator Large thermoplastic roller lever (Ø 50 mm)
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
1287.90 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRB121EX
  • 21 - 22 (Dust)
  • 1 contact operates in each direction
  • Series XCR Ex (Zones 21, 22)
  • Actuator Thermoplastic roller lever (Ø 30 mm)
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
1179.50 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRE181EX
  • 21 - 22 (Dust)
  • both contacts operate in each direction
  • Series XCR Ex (Zones 21, 22)
  • Actuator With cruciform metal rods
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
843.40 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRF171EX
  • 21 - 22 (Dust)
  • 1 contact operates in each direction
  • Series XCR Ex (Zones 21, 22)
  • Actuator With cruciform metal rods
  • Housing material Metal
  • Function 2x NC + 2x NO
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
1092.70 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRT115EX
  • 21 - 22 (Dust)
  • Series XCR Ex (Zones 21, 22)
  • Actuator Galvanised steel operating lever
  • Housing material Zinc alloy enclosure
  • Function 2 changeover (NO/NC)
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
1005.50 CHF
Ø 15 - 25 working days (*)
Telemecanique XCRT215EX
  • 21 - 22 (Dust)
  • Series XCR Ex (Zones 21, 22)
  • Actuator Stainless steel operating lever
  • Housing material Zinc alloy enclosure
  • Function 2 changeover (NO/NC)
  • Circuit type Snap action
  • Contact material Standard
  • Connection No 13 cable gland
1823.90 CHF
 
 

ABOUT US

PRODUCTS SUPPORT AND SERVICE OUR PARTNER
  Company
Your requirements

Contact
Vacancies

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG

Sensors
Automation
Components
Distribution, Wiring
Ex Zone


ACTUAL
News
OEM Login Request
Call orders
More than 30 years of experience
Your requirements, our solutions
Testing units

Sensor KnowHow


Software Download

Available second source solutions
Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Due to worldwide resource problems, there may be deviations in the stated delivery times! 
 
             

 

Your E-mail: