Housing Telemecanique | SENTRONIC AG

Privacy Settings

Our website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. Please agree:

Technical essential cookies
Analytics cookies
Marketing cookies
Personalized cookies
back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back

Data Processing Consent for AI Chatbot

Please read these terms carefully before using our chatbot. By using the chatbot, you agree to these terms.

1. Chatbot Service

Our chatbot service is provided to assist you in two ways:

  • Navigation: To quickly take you to the product information you require.
  • Search Assistant: To assist you with your inquiries and provide information about our products and services.

The chatbot is powered by Google's Gemini technology.

2. Data Processing and Transfer to the USA

  • Data Controller: The website operator, defined in the legal notice of this website, is the data controller for the personal data processed through this chatbot.
  • Data Processor: Google LLC, located in the United States, acts as a data processor on our behalf.
  • Data Transfer: By using this chatbot, you acknowledge and agree that your personal data, including the content of your chat conversations, will be transmitted to and processed by Google in the United States. A transfer only takes place when you sent a query to the chatbot. Simply loading the chatbot doesn’t transfer any data.
  • Data Storage: The chat conversations are stored only on our servers, located in Germany, which is part of the European Union. Google, as our data processor, only processes the data to provide the chatbot functionality; Google does not store the chat conversations on its servers for its own purposes beyond the immediate processing required to operate the chatbot.
  • Legal Basis for Transfer: The data transfer to the USA is based on DPF: Google LLC is certified under the EU-U.S. Data Privacy Framework. This certification covers the specific data processing activities of this chatbot.
  • Data Processing Purposes: Your data will be processed for the following purposes:
    • To provide you with the chatbot service and respond to your inquiries (both learning-related and shopping-related).
    • To improve the quality and functionality of the chatbot.
    • To understand user needs and improve our products, services and courses.
  • Data Minimization: We will only collect and process the data that is strictly necessary for the above purposes.
  • Data Security: We implement appropriate technical and organizational measures to protect your data. However, please be aware that data transmission over the internet is not completely secure.

3. Risks of Data Transfer

We love the United States of America, but the European Union believes that they may not provide the same level of data protection as the European Union. By agreeing to these terms, you acknowledge that there are potential risks associated with the transfer of your data to the USA, including the possibility of access by US government authorities.

4. Your Consent

By clicking "I Agree" below, you explicitly consent to the processing of your personal data as described in these terms, including the transfer to Google in the United States. You confirm you have read and understood these terms.

5. Withdrawal of Consent

You have the right to withdraw your consent at anytime. Withdrawing your consent will prevent further processing of your data in the chatbot. To withdraw your consent, just click on the “AI Privacy” link in our chatbot.

back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back
DEU | ENG | FRA
Log in
Detect
Photoelectric sensors, Inductive sensors, Capacitive sensors, Ultrasonic sensors, Label Sensors
Measuring
Measurement sensors, Encoders, IR Temperature Sensors, Pressure / Vacuum sensors, Gauging switches
Protecting, Monitoring
Safety light curtains, Safety laser scanner, Safety limit switches, Safety magnetic switches, Safety door switches, Safety relays
Capture values
People counting, presence detection, temperature data acquisition, humidity data acquisition, leakages, filling levels
Separation & Switching
Solid-state relays, Solid State Contactors, Solid State Reverse Contactors, Motor circuit breakers, Overload relays, Contactors, Reversing contactors
Automation
Controllers, PLC, Timer, Control relays, Solid state relays, Optocouplers, Counter, Temperature controls, Transmitters, Power supplies, Displays, Motors
Operating & display
Pushbuttons, rotary switches, touch panels, bargraph displays, process displays, empty and complete housings
Climate technology
Climatic transmitters, data loggers, liquid manometers, handheld instruments, measuring probes
Distribution, wiring
Connection cables, Extension cables, Jumper cables, PVC+ cables, PUR cables, Connector, Custom cables
Ex Zone
Ex Pneumatic, Ex sensors, Ex mechanical switches, Ex terminal boxes, Ex control functions, Ex linebushings
Senior products
Old series, Discontinuation, Special parts
Information
User Online: 578
Counter: 85490153

Housing

 
  Do you need help choosing the right Limit switch accessories?
I would be happy to assist you with this highly versatile product 👍

Fabian Hauser, Sales Engineer
 
 
 
Brand
Telemecanique (189)
Suitable for
XCK D series (16)
XCK J series (52)
XCK L series (8)
XCK M series (16)
XCK P series (17)
XCK S series (17)
XCK T series (14)
XCM D series (41)
XCM V series (8)
Accessories group
Housing (189)
Function
1xNC + 2xNO slow break (2)
1xNC + 2xNO snap action (6)
2x NC slow break (14)
2x NC snap action (18)
2x NO slow break (13)
2x NO Switching simultaneously (2)
2x NO/NC (Changeover) (15)
2xNC + 1xNO slow break (9)
2xNC + 1xNO snap action (9)
2xNC + 2xNO snap action (16)
NC+NC snap action (3)
NC+NO slow break (34)
NC+NO snap action (40)
NO/NC (Changeover) simultaneous (1)
NO/NC (Changeover) (7)
without (1)
Version
Gold-plated contacts (15)
Silver (standard) (174)
Connection
7/8 16 UN, 5pol, Pigtail 800mm (1)
AMP Superseal 1.5 (3)
DEUTSCH DT04-4P (5)
ISO M16x1,5mm (5)
ISO M20x1,5mm (37)
Cable 0,3m (1)
Cable 10m (2)
Cable 1m (7)
Cable 2m (7)
Cable 3m (1)
Cable 5m (8)
M12 Conn., 4pin (5)
M12 Conn., 5pin (10)
M12, 4pol (1)
M12, 5pol, Pigtail 800mm (1)
NPT 1/2 (10)
without (34)
Pg 11 (17)
Pg 13 (34)
189 Results
Sort by
Availability

28 pcs available immediately
Telemecanique ZCD21
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection without
23.40 CHF
16 pcs available immediately
Telemecanique ZCD21M12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
50.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD25
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection without
27.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD26
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection without
34.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD27
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection without
32.20 CHF
1 pcs available immediately
Telemecanique ZCD28
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NO Switching simultaneously
  • Version Silver (standard)
  • Connection without
31.30 CHF
15 pcs available immediately
Telemecanique ZCD29
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection without
30.80 CHF
5 pcs available immediately
Telemecanique ZCD29M12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
66.30 CHF
5 pcs available immediately
Telemecanique ZCD31
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection without
45.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD35
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 1xNC + 2xNO slow break
  • Version Silver (standard)
  • Connection without
49.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD37
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection without
41.90 CHF
2 pcs available immediately
Telemecanique ZCD39
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection without
36.70 CHF
5 pcs available immediately
Telemecanique ZCD61
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection without
47.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD65
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Gold-plated contacts
  • Connection without
51.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD67
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Gold-plated contacts
  • Connection without
58.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCD68
  • Housing only, without actuator
  • without connection
  • Suitable for XCK D series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Gold-plated contacts
  • Connection without
62.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ01
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
74.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ02
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover) simultaneous
  • Version Silver (standard)
  • Connection Pg 13
86.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ04
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
103.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ1
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 13
41.50 CHF
3 pcs available immediately
Telemecanique ZCKJ11
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
82.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ1121H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
115.50 CHF
5 pcs available immediately
Telemecanique ZCKJ115H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
80.00 CHF
3 pcs available immediately
Telemecanique ZCKJ11H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
83.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ120
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 13
39.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ121
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 13
59.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ15
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection Pg 13
49.20 CHF
44 pcs available immediately
Telemecanique ZCKJ15H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection ISO M20x1,5mm
56.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ18
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection Pg 13
50.70 CHF
20 pcs available immediately
Telemecanique ZCKJ1D
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
81.90 CHF
149 pcs available immediately
Telemecanique ZCKJ1H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
42.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ1H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection NPT 1/2
50.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ1TK
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 13
50.70 CHF
10 pcs available immediately
Telemecanique ZCKJ2
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Pg 13
69.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ21
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Pg 13
110.50 CHF
10 pcs available immediately
Telemecanique ZCKJ21H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
127.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ25
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Pg 13
73.10 CHF
10 pcs available immediately
Telemecanique ZCKJ28
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Gold-plated contacts
  • Connection Pg 13
82.80 CHF
10 pcs available immediately
Telemecanique ZCKJ2H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
70.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ2H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection NPT 1/2
81.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ4
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
72.70 CHF
2 pcs available immediately
Telemecanique ZCKJ404
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
106.40 CHF
4 pcs available immediately
Telemecanique ZCKJ4045
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
117.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ4045H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
119.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ4046H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
114.20 CHF
2 pcs available immediately
Telemecanique ZCKJ404H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
114.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ41
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
122.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ4104H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection NPT 1/2
173.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ41H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
126.50 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ45
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
76.50 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ4H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
73.30 CHF
6 pcs available immediately
Telemecanique ZCKJ5
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 13
45.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ5D
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
96.90 CHF
19 pcs available immediately
Telemecanique ZCKJ5H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
48.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ5H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection NPT 1/2
46.70 CHF
1 pcs available immediately
Telemecanique ZCKJ6
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 13
44.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ6H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
47.10 CHF
9 pcs available immediately
Telemecanique ZCKJ7
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection Pg 13
51.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ7D
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
88.50 CHF
5 pcs available immediately
Telemecanique ZCKJ7H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
52.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJ8
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection Pg 13
44.10 CHF
5 pcs available immediately
Telemecanique ZCKJ8D
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
84.40 CHF
5 pcs available immediately
Telemecanique ZCKJ8H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
46.90 CHF
20 pcs available immediately
Telemecanique ZCKJ9
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Pg 13
51.10 CHF
60 pcs available immediately
Telemecanique ZCKJ9H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
66.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKJD31H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
67.60 CHF
4 pcs available immediately
Telemecanique ZCKJD37H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
54.90 CHF
5 pcs available immediately
Telemecanique ZCKJD39H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK J series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
57.90 CHF
6 pcs available immediately
Telemecanique ZCKL1
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 11
54.50 CHF
2 pcs available immediately
Telemecanique ZCKL1H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection NPT 1/2
65.60 CHF
5 pcs available immediately
Telemecanique ZCKL5
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
58.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKL5H7
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection NPT 1/2
75.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKL6
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
74.80 CHF
14 pcs available immediately
Telemecanique ZCKL7
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection Pg 11
69.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKL8
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection Pg 11
67.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKLD37
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK L series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection Pg 13
86.50 CHF
19 pcs available immediately
Telemecanique ZCKM1
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 11
32.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKM18
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 11
44.60 CHF
54 pcs available immediately
Telemecanique ZCKM1H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
33.00 CHF
4 pcs available immediately
Telemecanique ZCKM5
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
35.10 CHF
3 pcs available immediately
Telemecanique ZCKM5H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
38.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKM6
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
42.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKM7
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection Pg 11
40.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKM7H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
43.20 CHF
2 pcs available immediately
Telemecanique ZCKM8
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection Pg 11
40.40 CHF
2 pcs available immediately
Telemecanique ZCKM8H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
40.20 CHF
2 pcs available immediately
Telemecanique ZCKM9
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Pg 11
36.90 CHF
2 pcs available immediately
Telemecanique ZCKM9H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
39.50 CHF
20 pcs available immediately
Telemecanique ZCKMD31
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Pg 13
50.20 CHF
3 pcs available immediately
Telemecanique ZCKMD31H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
53.40 CHF
3 pcs available immediately
Telemecanique ZCKMD37H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
90.90 CHF
3 pcs available immediately
Telemecanique ZCKMD39H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK M series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
45.70 CHF
10 pcs available immediately
Telemecanique ZCKS1H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
27.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS2
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
49.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS2H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
50.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS404
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NO/NC (Changeover)
  • Version Silver (standard)
  • Connection Pg 13
73.30 CHF
5 pcs available immediately
Telemecanique ZCKS5
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 13
29.00 CHF
5 pcs available immediately
Telemecanique ZCKS5H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
29.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS6
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 13
35.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS6H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
34.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS7
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection Pg 13
32.90 CHF
10 pcs available immediately
Telemecanique ZCKS7H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
39.50 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS8
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection Pg 13
31.70 CHF
3 pcs available immediately
Telemecanique ZCKS8H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
30.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKS9
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Pg 13
31.10 CHF
5 pcs available immediately
Telemecanique ZCKS9H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
29.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKSD31H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
47.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKSD39
  • Housing only, without actuator
  • Pg 13 Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection Pg 13
36.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCKSD39H29
  • Housing only, without actuator
  • M20x1,5mm Connection
  • Suitable for XCK S series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection ISO M20x1,5mm
41.30 CHF
20 pcs available immediately
Telemecanique ZCMD21
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection without
41.70 CHF
10 pcs available immediately
Telemecanique ZCMD21AM4
  • Housing only, without actuator
  • AMP Superseal 1.5
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection AMP Superseal 1.5
32.60 CHF
46 pcs available immediately
Telemecanique ZCMD21C12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
67.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD21L08R12
  • Housing only, without actuator
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12, 5pol, Pigtail 800mm
75.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD21L08U78
  • Housing only, without actuator
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection 7/8 16 UN, 5pol, Pigtail 800mm
Price on request
20 pcs available immediately
Telemecanique ZCMD21L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Cable 1m
54.70 CHF
7 pcs available immediately
Telemecanique ZCMD21L10
  • Housing only, without actuator
  • Cable connection 10m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Cable 10m
92.00 CHF
38 pcs available immediately
Telemecanique ZCMD21L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Cable 2m
62.50 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD21L3
  • Housing only, without actuator
  • Cable connection 3m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Cable 3m
60.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD21L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Cable 5m
80.80 CHF
30 pcs available immediately
Telemecanique ZCMD21M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NO/NC (Changeover)
  • Version Silver (standard)
  • Connection M12, 4pol
67.90 CHF
18 pcs available immediately
Telemecanique ZCMD25
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection without
45.00 CHF
2 pcs available immediately
Telemecanique ZCMD25AM4
  • Housing only, without actuator
  • AMP Superseal 1.5
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection AMP Superseal 1.5
33.10 CHF
35 pcs available immediately
Telemecanique ZCMD25L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Cable 1m
62.30 CHF
35 pcs available immediately
Telemecanique ZCMD25L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Cable 2m
66.40 CHF
10 pcs available immediately
Telemecanique ZCMD25L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Cable 5m
87.90 CHF
10 pcs available immediately
Telemecanique ZCMD29
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection without
47.50 CHF
2 pcs available immediately
Telemecanique ZCMD29AM4
  • Housing only, without actuator
  • AMP Superseal 1.5
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NC snap action
  • Version Silver (standard)
  • Connection AMP Superseal 1.5
33.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD29C12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection M12 Conn., 5pin
72.70 CHF
45 pcs available immediately
Telemecanique ZCMD29L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Cable 1m
62.20 CHF
40 pcs available immediately
Telemecanique ZCMD29L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Cable 2m
71.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD29L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection Cable 5m
91.70 CHF
10 pcs available immediately
Telemecanique ZCMD37
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection without
64.30 CHF
10 pcs available immediately
Telemecanique ZCMD37L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection Cable 1m
101.60 CHF
10 pcs available immediately
Telemecanique ZCMD37L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection Cable 2m
111.80 CHF
10 pcs available immediately
Telemecanique ZCMD37L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection Cable 5m
132.00 CHF
10 pcs available immediately
Telemecanique ZCMD39
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection without
59.30 CHF
5 pcs available immediately
Telemecanique ZCMD39L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection Cable 1m
75.20 CHF
5 pcs available immediately
Telemecanique ZCMD39L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection Cable 2m
75.40 CHF
10 pcs available immediately
Telemecanique ZCMD39L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection Cable 5m
115.70 CHF
4 pcs available immediately
Telemecanique ZCMD41L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 1m
79.30 CHF
1 pcs available immediately
Telemecanique ZCMD41L10
  • Housing only, without actuator
  • Cable connection 10m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 10m
118.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD41L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 2m
85.70 CHF
8 pcs available immediately
Telemecanique ZCMD41L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 5m
103.40 CHF
10 pcs available immediately
Telemecanique ZCMD61
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection without
49.60 CHF
15 pcs available immediately
Telemecanique ZCMD61C12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Gold-plated contacts
  • Connection M12 Conn., 5pin
83.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD65
  • Housing only, without actuator
  • without connection
  • Suitable for XCM D series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Gold-plated contacts
  • Connection without
53.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMD69C12
  • Housing only, without actuator
  • M12 Conn., 5pin
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Gold-plated contacts
  • Connection M12 Conn., 5pin
93.10 CHF
2 pcs available immediately
Telemecanique ZCMD81L1
  • Housing only, without actuator
  • Cable connection 1m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Gold-plated contacts
  • Connection Cable 1m
111.90 CHF
2 pcs available immediately
Telemecanique ZCMD81L2
  • Housing only, without actuator
  • Cable connection 2m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Gold-plated contacts
  • Connection Cable 2m
123.10 CHF
2 pcs available immediately
Telemecanique ZCMD81L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM D series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Gold-plated contacts
  • Connection Cable 5m
113.30 CHF
2 pcs available immediately
Telemecanique ZCMV21D44
  • Housing only, without actuator
  • Connector Deutsch DT04-4P
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Deutsch DT04-4P
34.20 CHF
10 pcs available immediately
Telemecanique ZCMV21M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12 Conn., 4pin
36.80 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMV25D44
  • Housing only, without actuator
  • Connector Deutsch DT04-4P
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Deutsch DT04-4P
34.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMV25M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection M12 Conn., 4pin
37.10 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMV29D44
  • Housing only, without actuator
  • Connector Deutsch DT04-4P
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NC snap action
  • Version Silver (standard)
  • Connection Deutsch DT04-4P
34.20 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCMV29M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCM V series
  • Accessories group Housing
  • Function NC+NC snap action
  • Version Silver (standard)
  • Connection M12 Conn., 4pin
37.60 CHF
13 pcs available immediately
Telemecanique ZCMV41L03
  • Housing only, without actuator
  • Cable connection 0,3m
  • Suitable for XCM V series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 0,3m
63.30 CHF
8 pcs available immediately
Telemecanique ZCMV41L5
  • Housing only, without actuator
  • Cable connection 5m
  • Suitable for XCM V series
  • Accessories group Housing
  • Function 2xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection Cable 5m
63.70 CHF
89 pcs available immediately
Telemecanique ZCP21
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection without
13.90 CHF
3 pcs available immediately
Telemecanique ZCP21D44
  • Housing only, without actuator
  • Connector Deutsch DT04-4P
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection DEUTSCH DT04-4P
31.90 CHF
10 pcs available immediately
Telemecanique ZCP21M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection M12 Conn., 4pin
32.90 CHF
22 pcs available immediately
Telemecanique ZCP25
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection without
17.60 CHF
10 pcs available immediately
Telemecanique ZCP27
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection without
22.10 CHF
10 pcs available immediately
Telemecanique ZCP28
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NO Switching simultaneously
  • Version Silver (standard)
  • Connection without
20.00 CHF
15 pcs available immediately
Telemecanique ZCP29
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection without
20.40 CHF
3 pcs available immediately
Telemecanique ZCP29M12
  • Housing only, without actuator
  • M12 Conn., 4pin
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection M12 Conn., 4pin
39.00 CHF
18 pcs available immediately
Telemecanique ZCP31
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 1xNC + 2xNO snap action
  • Version Silver (standard)
  • Connection without
29.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCP35
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 1xNC + 2xNO slow break
  • Version Silver (standard)
  • Connection without
Price on request
Ø 3 - 7 working days (*)
Telemecanique ZCP37
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2xNC + 1xNO slow break
  • Version Silver (standard)
  • Connection without
40.60 CHF
20 pcs available immediately
Telemecanique ZCP39
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2xNC + 1xNO snap action
  • Version Silver (standard)
  • Connection without
24.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCP61
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection without
33.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCP66
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection without
31.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCP68
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection without
Price on request
Ø 3 - 7 working days (*)
Telemecanique ZCP69
  • Housing only, without actuator
  • without connection
  • Suitable for XCK P series
  • Accessories group Housing
  • Function 2x NC snap action
  • Version Silver (standard)
  • Connection without
32.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCPED44
  • Housing only, without actuator
  • Connector Deutsch DT04-4P
  • Suitable for XCK P series
  • Accessories group Housing
  • Function without
  • Version Silver (standard)
  • Connection DEUTSCH DT04-4P
19.50 CHF
25 pcs available immediately
Telemecanique ZCT21G11
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection Pg 11
22.60 CHF
2 pcs available immediately
Telemecanique ZCT21N12
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection NPT 1/2
30.10 CHF
27 pcs available immediately
Telemecanique ZCT21P16
  • Housing only, without actuator
  • M16x1,5mm Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO snap action
  • Version Silver (standard)
  • Connection ISO M16x1,5mm
22.20 CHF
4 pcs available immediately
Telemecanique ZCT25G11
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
24.50 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT25N12
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection NPT 1/2
36.10 CHF
3 pcs available immediately
Telemecanique ZCT25P16
  • Housing only, without actuator
  • M16x1,5mm Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M16x1,5mm
25.90 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT26G11
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection Pg 11
27.60 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT26P16
  • Housing only, without actuator
  • M16x1,5mm Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function NC+NO slow break
  • Version Silver (standard)
  • Connection ISO M16x1,5mm
29.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT27G11
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection Pg 11
29.00 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT27N12
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection NPT 1/2
41.70 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT27P16
  • Housing only, without actuator
  • M16x1,5mm Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NC slow break
  • Version Silver (standard)
  • Connection ISO M16x1,5mm
29.40 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT28G11
  • Housing only, without actuator
  • Pg 11 Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection Pg 11
27.30 CHF
Ø 3 - 7 working days (*)
Telemecanique ZCT28N12
  • Housing only, without actuator
  • 1/2 NPT Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection NPT 1/2
Price on request
Ø 3 - 7 working days (*)
Telemecanique ZCT28P16
  • Housing only, without actuator
  • M16x1,5mm Connection
  • Suitable for XCK T series
  • Accessories group Housing
  • Function 2x NO slow break
  • Version Silver (standard)
  • Connection ISO M16x1,5mm
23.60 CHF
 
 

ABOUT US

PRODUCTS SUPPORT AND SERVICE OUR PARTNER
  Company
Your requirements

Contact
Vacancies

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG

Sensors
Automation
Components
Distribution, Wiring
Ex Zone


ACTUAL
News
OEM Login Request
Call orders
More than 30 years of experience
Your requirements, our solutions
Testing units

Sensor KnowHow


Software Download

Available second source solutions
Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Due to worldwide resource problems, there may be deviations in the stated delivery times! 
 
             

 

Your E-mail: