SENTRONIC AG | Connecting cables for demanding industrial environments

Privacy Settings

Our website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. Please agree:

Technical essential cookies
Analytics cookies
Marketing cookies
Personalized cookies
back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back

Data Processing Consent for AI Chatbot

Please read these terms carefully before using our chatbot. By using the chatbot, you agree to these terms.

1. Chatbot Service

Our chatbot service is provided to assist you in two ways:

  • Navigation: To quickly take you to the product information you require.
  • Search Assistant: To assist you with your inquiries and provide information about our products and services.

The chatbot is powered by Google's Gemini technology.

2. Data Processing and Transfer to the USA

  • Data Controller: The website operator, defined in the legal notice of this website, is the data controller for the personal data processed through this chatbot.
  • Data Processor: Google LLC, located in the United States, acts as a data processor on our behalf.
  • Data Transfer: By using this chatbot, you acknowledge and agree that your personal data, including the content of your chat conversations, will be transmitted to and processed by Google in the United States. A transfer only takes place when you sent a query to the chatbot. Simply loading the chatbot doesn’t transfer any data.
  • Data Storage: The chat conversations are stored only on our servers, located in Germany, which is part of the European Union. Google, as our data processor, only processes the data to provide the chatbot functionality; Google does not store the chat conversations on its servers for its own purposes beyond the immediate processing required to operate the chatbot.
  • Legal Basis for Transfer: The data transfer to the USA is based on DPF: Google LLC is certified under the EU-U.S. Data Privacy Framework. This certification covers the specific data processing activities of this chatbot.
  • Data Processing Purposes: Your data will be processed for the following purposes:
    • To provide you with the chatbot service and respond to your inquiries (both learning-related and shopping-related).
    • To improve the quality and functionality of the chatbot.
    • To understand user needs and improve our products, services and courses.
  • Data Minimization: We will only collect and process the data that is strictly necessary for the above purposes.
  • Data Security: We implement appropriate technical and organizational measures to protect your data. However, please be aware that data transmission over the internet is not completely secure.

3. Risks of Data Transfer

We love the United States of America, but the European Union believes that they may not provide the same level of data protection as the European Union. By agreeing to these terms, you acknowledge that there are potential risks associated with the transfer of your data to the USA, including the possibility of access by US government authorities.

4. Your Consent

By clicking "I Agree" below, you explicitly consent to the processing of your personal data as described in these terms, including the transfer to Google in the United States. You confirm you have read and understood these terms.

5. Withdrawal of Consent

You have the right to withdraw your consent at anytime. Withdrawing your consent will prevent further processing of your data in the chatbot. To withdraw your consent, just click on the “AI Privacy” link in our chatbot.

back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back
DEU | ENG | FRA
Log in
Sensors
Optical, Inductive, Capacitive, Ultrasonic, IR sensors, Labelsensors, Pressure, Vacuum, Pitot pressure switch, Level control, Mechanical switches, Temperature sensors
Capture values
People counting, presence detection, temperature data acquisition, humidity data acquisition, leakages, filling levels
Separation & Switching
Solid-state relays, Solid State Contactors, Solid State Reverse Contactors, Motor circuit breakers, Overload relays, Contactors, Reversing contactors
Automation
Controllers, PLC, Timer, Control relays, Solid state relays, Optocouplers, Counter, Temperature controls, Transmitters, Power supplies, Displays, Motors
Operating & display
Pushbuttons, rotary switches, touch panels, bargraph displays, process displays, empty and complete housings
Climate technology
Climatic transmitters, data loggers, liquid manometers, handheld instruments, measuring probes
Wiring Components
M8, M12, male, female
Ex Zone
Ex Pneumatic, Ex sensors, Ex mechanical switches, Ex terminal boxes, Ex control functions, Ex linebushings
Senior products
Old series, Discontinuation, Special parts
Information
User Online: 909
Counter: 85489127

>

>

Connection cable

Connection cable

for severe industrial environments

Anschlusskabel
Brand
Sentronic (17)
Telemecanique (128)
Length
mm
 - 
mm
Side (A)
7/8 inch, Female (8)
DIN 43650 A, Female (1)
M12, Female (51)
M12, Male (8)
M8, Female (44)
open (3)
Snap Ø8, Female (20)
½ Inch, Female (10)
Version (A)
270° Rotated (2)
Stainless steel 316L + LED (PNP) (2)
Stainless steel 316L (19)
With LED (NPN) (7)
With LED (PNP) (9)
open (3)
Special version (15)
Standard (90)
Pins (A)
3-pin (11)
3 (56)
4-pin (6)
4 (27)
5 (59)
without (3)
Side (B)
M12, Male (26)
M8, Male (4)
open (115)
Version (B)
open (115)
Standard (30)
Pins (B)
3 (3)
5 (27)
without (115)
Number of wires
3 (70)
4 (48)
5 (27)
Wire thickness
0,14 mm2 (17)
0,34 mm2 (119)
0,5 mm2 (9)
Material
PUR (119)
PVC+ (Food) (23)
PVR (3)
145 Results
Sort by
Availability

Ø 3 - 7 working days (*)
Sentronic AT14-32-PUR-S8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 3 - 7 working days (*)
Sentronic AT14-32-PUR-S8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 3 - 7 working days (*)
Sentronic AT14-320-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 20'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
7 pcs available immediately
Sentronic AT14-33-PUR-M8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 3'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 3 - 7 working days (*)
Sentronic AT14-33-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 3'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
45 pcs available immediately
Sentronic AT14-33-PUR-S8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 3'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
34 pcs available immediately
Sentronic AT14-33-PUR-S8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 3'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
13 pcs available immediately
Sentronic AT14-35-PUR-M8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
45 pcs available immediately
Sentronic AT14-35-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
41 pcs available immediately
Sentronic AT14-35-PUR-S8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
98 pcs available immediately
Sentronic AT14-35-PUR-S8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 3 - 7 working days (*)
Sentronic AT14-41-PUR-M8/270°
  • Thin 0,14 mm2 wires
  • Special version 270°
  • angled
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) 270° Rotated
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 3 - 7 working days (*)
Sentronic AT14-420-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 20'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
14 pcs available immediately
Sentronic AT14-43-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 3'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
6 pcs available immediately
Sentronic AT14-45-PUR-M8/270°
  • Thin 0,14 mm2 wires
  • Special version 270°
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) 270° Rotated
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
34 pcs available immediately
Sentronic AT14-45-PUR-M8/90°
  • Thin 0,14 mm2 wires
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
29 pcs available immediately
Sentronic AT14-45-PUR-M8/G
  • Thin 0,14 mm2 wires
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4-pin
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,14 mm2
  • Material PUR
Price on request
Ø 7 - 15 working days (*)
Telemecanique XZCB4L0025
  • only cable, both sides open
  • Length 25'000 mm
  • Side (A) open
  • Version (A) open
  • Pins (A) without
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,5 mm2
  • Material PVR
73.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCB4L0050
  • only cable, both sides open
  • Length 50'000 mm
  • Side (A) open
  • Version (A) open
  • Pins (A) without
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,5 mm2
  • Material PVR
174.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCB4L0100
  • only cable, both sides open
  • Length 100'000 mm
  • Side (A) open
  • Version (A) open
  • Pins (A) without
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,5 mm2
  • Material PVR
332.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0166L10
  • straight
  • Length 10'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
28.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0166L2
  • straight
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
15.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0166L5
  • straight
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0266L10
  • angled
  • Length 10'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
31.10 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP0266L2
  • angled
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
17.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0266L5
  • angled
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
19.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0366L10
  • angled
  • Length 10'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
40.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0366L2
  • angled
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0366L5
  • angled
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
25.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0466L2
  • angled
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) With LED (NPN)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0466L5
  • angled
  • Length 5'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) With LED (NPN)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
26.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0566L10
  • straight
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
28.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0566L2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
16.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0566L5
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
19.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0666L10
  • angled
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
29.30 CHF
11 pcs available immediately
Telemecanique XZCP0666L2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
16.20 CHF
8 pcs available immediately
Telemecanique XZCP0666L5
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0766L10
  • angled
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
39.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0766L2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
23.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0766L5
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) With LED (PNP)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
28.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0866L2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) With LED (NPN)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
17.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0866L5
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) With LED (NPN)
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
21.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0941L10
  • straight
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
29.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP0941L2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
16.70 CHF
5 pcs available immediately
Telemecanique XZCP0941L5
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
20.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1041L10
  • angled
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
30.20 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP1041L2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
19.10 CHF
5 pcs available immediately
Telemecanique XZCP1041L5
  • angled
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
19.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1141L10
  • straight
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
29.60 CHF
5 pcs available immediately
Telemecanique XZCP1141L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
16.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1141L5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
20.20 CHF
5 pcs available immediately
Telemecanique XZCP1164L10
  • straight
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
45.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1164L15
  • straight
  • Length 15'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
50.10 CHF
1 pcs available immediately
Telemecanique XZCP1164L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
25.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1164L25
  • straight
  • Length 25'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
83.80 CHF
10 pcs available immediately
Telemecanique XZCP1164L5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
31.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1169L10
  • straight
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
34.10 CHF
5 pcs available immediately
Telemecanique XZCP1169L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
18.10 CHF
10 pcs available immediately
Telemecanique XZCP1169L5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
23.80 CHF
6 pcs available immediately
Telemecanique XZCP1241L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
29.90 CHF
7 pcs available immediately
Telemecanique XZCP1241L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
16.30 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP1241L25
  • angled
  • Length 25'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
74.20 CHF
2 pcs available immediately
Telemecanique XZCP1241L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
20.50 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP1264L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
46.30 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP1264L15
  • angled
  • Length 15'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
49.70 CHF
9 pcs available immediately
Telemecanique XZCP1264L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
25.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1264L25
  • angled
  • Length 25'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
68.20 CHF
5 pcs available immediately
Telemecanique XZCP1264L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
31.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1340L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (PNP)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
37.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1340L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (PNP)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
22.20 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCP1340L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (PNP)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
26.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1440L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (NPN)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
37.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1440L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (NPN)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1440L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) With LED (NPN)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
27.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1541L05
  • straight
  • Length 500 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
19.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1541L1
  • straight
  • Length 1'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
18.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1541L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
19.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1564L05
  • straight
  • Length 500 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
25.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1564L1
  • straight
  • Length 1'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
20.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1564L10
  • straight
  • Length 10'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
50.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1564L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
22.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1564L5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Male
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
28.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1662L2
  • straight
  • Length 2'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
32.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1662L5
  • straight
  • Length 5'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
47.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1670L10
  • straight
  • Length 10'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
43.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1670L2
  • straight
  • Length 2'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
32.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1670L5
  • straight
  • Length 5'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
46.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1764L10
  • straight
  • Length 10'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
103.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1764L2
  • straight
  • Length 2'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
51.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1764L5
  • straight
  • Length 5'000 mm
  • Side (A) 7/8 inch, Female
  • Version (A) Special version
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
65.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1865L10
  • straight
  • Length 10'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
34.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1865L2
  • straight
  • Length 2'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.60 CHF
2 pcs available immediately
Telemecanique XZCP1865L5
  • straight
  • Length 5'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
24.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1965L10
  • angled
  • Length 10'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
34.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP1965L2
  • angled
  • Length 2'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
20.90 CHF
5 pcs available immediately
Telemecanique XZCP1965L5
  • angled
  • Length 5'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Special version
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
24.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP2540L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L + LED (PNP)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
51.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCP2540L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L + LED (PNP)
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
28.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA0566L10
  • straight
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
39.10 CHF
Ø 3 - 7 working days (*)
Telemecanique XZCPA0566L5
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
30.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA0941L10
  • straight
  • Length 10'000 mm
  • Side (A) M8, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
46.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA0941L5
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 4
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
37.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1141L10
  • straight
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
45.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1141L2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
22.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1141L5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
32.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1164L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
58.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1164L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
Price on request
Ø 3 - 7 working days (*)
Telemecanique XZCPA1164L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
41.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1241L10
  • angled
  • Length 10'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
40.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1241L2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
22.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1241L5
  • angled
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 5
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
32.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1865L10
  • straight
  • Length 10'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
45.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1865L5
  • straight
  • Length 5'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
29.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1965L10
  • angled
  • Length 10'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
43.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCPA1965L5
  • angled
  • Length 5'000 mm
  • Side (A) ½ Inch, Female
  • Version (A) Stainless steel 316L
  • Pins (A) 3
  • Side (B) open
  • Version (B) open
  • Pins (B) without
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
30.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1501040G1
  • straight
  • Length 1'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
24.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1501040G2
  • straight
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
25.90 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1502040G2
  • angled
  • Length 2'000 mm
  • Side (A) Snap Ø8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
27.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1509040H1
  • straight
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
25.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1509040H2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
29.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1509041J1
  • straight
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
24.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1509041J2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
28.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1510040H2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
24.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1510041J1
  • angled
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
21.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1510041J2
  • angled
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
30.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1511040E2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
27.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1511041C1
  • straight
  • Length 1'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
26.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1511041C2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
28.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1511064D1
  • straight
  • Length 1'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
34.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1511064D2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
34.50 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1512041C1
  • angled
  • Length 1'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
28.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1512041C2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PUR
27.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1512064D1
  • angled
  • Length 1'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
33.80 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1512064D2
  • angled
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PUR
34.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR1523062K1
  • angled
  • Length 1'000 mm
  • Side (A) DIN 43650 A, Female
  • Version (A) Special version
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,5 mm2
  • Material PUR
26.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR2705037R1
  • straight
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M8, Male
  • Version (B) Standard
  • Pins (B) 3
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
25.20 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR2705037R2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M8, Male
  • Version (B) Standard
  • Pins (B) 3
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
26.00 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR2706037R1
  • angled
  • Length 1'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 3
  • Side (B) M8, Male
  • Version (B) Standard
  • Pins (B) 3
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
25.60 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCR2711037T2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M8, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 3
  • Wire thickness 0,34 mm2
  • Material PUR
30.10 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCRA150941J2
  • straight
  • Length 2'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
45.10 CHF
4 pcs available immediately
Telemecanique XZCRA150941J5
  • straight
  • Length 5'000 mm
  • Side (A) M8, Female
  • Version (A) Standard
  • Pins (A) 4
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
50.70 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCRA151141C2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
43.30 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCRA151141C5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 4
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
50.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCRA151164D2
  • straight
  • Length 2'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
56.40 CHF
Ø 7 - 15 working days (*)
Telemecanique XZCRA151164D5
  • straight
  • Length 5'000 mm
  • Side (A) M12, Female
  • Version (A) Standard
  • Pins (A) 5
  • Side (B) M12, Male
  • Version (B) Standard
  • Pins (B) 5
  • Number of wires 5
  • Wire thickness 0,34 mm2
  • Material PVC+ (Food)
58.30 CHF
 
 

ABOUT US

PRODUCTS SUPPORT AND SERVICE OUR PARTNER
  Company
Your requirements

Contact
Vacancies

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG

Sensors
Automation
Components
Distribution, Wiring
Ex Zone


ACTUAL
News
OEM Login Request
Call orders
More than 30 years of experience
Your requirements, our solutions
Testing units

Sensor KnowHow


Software Download

Available second source solutions
Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Due to worldwide resource problems, there may be deviations in the stated delivery times! 
 
             

 

Your E-mail: