SENTRONIC AG | TesysU Control units

Privacy Settings

Our website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. Please agree:

Technical essential cookies
Analytics cookies
Marketing cookies
Personalized cookies
back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back

Data Processing Consent for AI Chatbot

Please read these terms carefully before using our chatbot. By using the chatbot, you agree to these terms.

1. Chatbot Service

Our chatbot service is provided to assist you in two ways:

  • Navigation: To quickly take you to the product information you require.
  • Search Assistant: To assist you with your inquiries and provide information about our products and services.

The chatbot is powered by Google's Gemini technology.

2. Data Processing and Transfer to the USA

  • Data Controller: The website operator, defined in the legal notice of this website, is the data controller for the personal data processed through this chatbot.
  • Data Processor: Google LLC, located in the United States, acts as a data processor on our behalf.
  • Data Transfer: By using this chatbot, you acknowledge and agree that your personal data, including the content of your chat conversations, will be transmitted to and processed by Google in the United States. A transfer only takes place when you sent a query to the chatbot. Simply loading the chatbot doesn’t transfer any data.
  • Data Storage: The chat conversations are stored only on our servers, located in Germany, which is part of the European Union. Google, as our data processor, only processes the data to provide the chatbot functionality; Google does not store the chat conversations on its servers for its own purposes beyond the immediate processing required to operate the chatbot.
  • Legal Basis for Transfer: The data transfer to the USA is based on DPF: Google LLC is certified under the EU-U.S. Data Privacy Framework. This certification covers the specific data processing activities of this chatbot.
  • Data Processing Purposes: Your data will be processed for the following purposes:
    • To provide you with the chatbot service and respond to your inquiries (both learning-related and shopping-related).
    • To improve the quality and functionality of the chatbot.
    • To understand user needs and improve our products, services and courses.
  • Data Minimization: We will only collect and process the data that is strictly necessary for the above purposes.
  • Data Security: We implement appropriate technical and organizational measures to protect your data. However, please be aware that data transmission over the internet is not completely secure.

3. Risks of Data Transfer

We love the United States of America, but the European Union believes that they may not provide the same level of data protection as the European Union. By agreeing to these terms, you acknowledge that there are potential risks associated with the transfer of your data to the USA, including the possibility of access by US government authorities.

4. Your Consent

By clicking "I Agree" below, you explicitly consent to the processing of your personal data as described in these terms, including the transfer to Google in the United States. You confirm you have read and understood these terms.

5. Withdrawal of Consent

You have the right to withdraw your consent at anytime. Withdrawing your consent will prevent further processing of your data in the chatbot. To withdraw your consent, just click on the “AI Privacy” link in our chatbot.

back

Impressum + AGB

Sentronic AG
Rugghölzli 2
CH- 5453 Busslingen

Tel +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
Email mailbox@sentronic.com

CHE-106.155.222 MWST
EORI-Nr. DE654654654
ZAZ-Nr. 9727-9


Our Terms & Conditions

Content: SENTRONIC AG constantly checks and updates the information on its web page. However, despite this, it is still possible that the information may have changed. No liability is therefore accepted nor warranty given that the information and data provided is current, correct or complete.

Changes: SENTRONIC AG reserves the right to make changes or additions to the information provided without prior notice.

Links: The web pages of SENTRONIC AG contain links to other websites. SENTRONIC AG is not responsible for the content of these websites.










back
back

Privacy Policy

Scope of Application

This data privacy policy is intended to inform users of our website in accordance with the Federal Data Protection Act and the Telemedia Act about the type, scope and purpose of the collection and use of personal data by the website operator.

The website operator takes your privacy very seriously and treats your personal data confidentially and in accordance with the legal regulations.

Please note that data transmission over the internet can always be subject to security vulnerabilities. A comprehensive protection against unauthorized access from third parties is not possible.

Access Data

The website operator or website provider collects data about accesses to the page and stores them as "server log files". The following data is logged:

  • visited website
  • time of access
  • amount of data sent in bytes
  • source/reference from which you came to the page
  • used browser
  • used operating system
  • used IP address

The collected data is used for statistical evaluations and to improve the website. The website operator reserves the right to check the server log files afterwards if there are specific indications of illegal use.

Cookies

This website uses cookies and includes third-party content and cookies also from outside the EU for analytics and marketing reasons, to personalize content, but also to offer a better user experience. Some of them are essential for technical reasons, some are optional. You can control that by yourself with our consent manager.

Cookies are small text files that are stored on your device. Your browser accesses these files. The use of these cookies is necessary so that your browser can be recognized between your clicks during a visit. Common browsers offer the option to disable cookies. Note: It is not guaranteed that you will be able to access all functions of this website without restrictions if you make the appropriate settings.

Handling of Personal Data

The website operator collects, uses and provides your personal data only if this is permitted by law or if you have agreed to the data collection.

Personal data is any information that can be used to identify you and which can be traced back to you - for example, your name, e-mail address and telephone number.

Handling of contact data

If you contact the website operator through the contact options provided, your details will be stored so that they can be used to process and answer your request. Without your consent, these data will not be passed on to third parties.

Handling of comments and contributions

If you leave a comment or contribution on this website, your IP address will be stored. This is for the security of the website operator: If your text violates the law, he wants to be able to trace your identity.

Handling of Service Related Data

To operate this AI service it is necessary to connect to public AI engines from Google and/or Open-AI in the USA. All data you input to AI are just used for processing answers and analyzes for you. We don't keep them outside of our system for a longer period.

User Account

In order to use this service, each customer must set up a password-protected customer account. This includes an overview of completed payments and the related invoices.

The operator does not assume any liability for password abuse if this was not caused by the operator himself.

Registration and Order Process

All data entered by customers during the registration and order process are stored. This includes:

  • Name, first name, title, salutation
  • Address
  • Payment data
  • E-mail address
  • Telephone number, fax, mobile phone
  • UID (VAT identification number) for companies

The data that is absolutely necessary for payment and operation is passed on to third-party service providers. As soon as the storage of your data is not longer necessary or is not longer legally required, it will be deleted.

Newsletter Subscription

The website operator offers you a newsletter in which he informs you about new features, maintenance, current events, and offers. If you want to subscribe to the newsletter, you must provide a valid e-mail address.

User Rights: Access, Rectification and Deletion

As a user, you receive free information on request about which personal data has been stored about you. If your request does not conflict with a statutory obligation to store data (e.g. data retention), you have the right to correct incorrect data and to block or delete your personal data.

back
DEU | ENG | FRA
Log in
Sensors
Optical, Inductive, Capacitive, Ultrasonic, IR sensors, Labelsensors, Pressure, Vacuum, Pitot pressure switch, Level control, Mechanical switches, Temperature sensors
Capture values
People counting, presence detection, temperature data acquisition, humidity data acquisition, leakages, filling levels
Separation & Switching
Solid-state relays, Solid State Contactors, Solid State Reverse Contactors, Motor circuit breakers, Overload relays, Contactors, Reversing contactors
Electric Regulating
Logic controller, Timers, Control relays, Counters
Move & Rotate
Motoren, Stellmotoren, Lüfter
Pneumatic regulating
Logic elements, Timer, Flow restrictor, 2-hand control, Push buttons, Position detectors, Microvalve, Pressure switches
Power supplies
Power supplies, Transformers, DC/DC converters, UPS systems
Converting, Transmitting
Climatic Transmitters, Isolator, Function modules, Current Loop, Limit-Alarme, Transducer, Power Monitor, PC Recorder
Operating & display
Pushbuttons, rotary switches, touch panels, bargraph displays, process displays, empty and complete housings
Climate technology
Climatic transmitters, data loggers, liquid manometers, handheld instruments, measuring probes
Distribution, wiring
Connection cables, Extension cables, Jumper cables, PVC+ cables, PUR cables, Connector, Custom cables
Ex Zone
Ex Pneumatic, Ex sensors, Ex mechanical switches, Ex terminal boxes, Ex control functions, Ex linebushings
Senior products
Old series, Discontinuation, Special parts
Information
User Online: 658
Counter: 85491990

Control units




Control units



The control unit determines the voltage for controlling the motor. It also determines the type of motor protection and its setting range.

Hint: If you are unsure, please use the Tesys U data sheet or contact us by phone, mail or chat. We will be happy to assist you in choosing the right components.
Brand
Schneider Electric (106)
Version
Magnetic control unit (19)
Advanced control unit (63)
Standard control unit (24)
Motor
1- and 3-phases (19)
1-phase (Class 10) (20)
3-phases (Class 10) (47)
3-phases (Class 20) (20)
For basic unit
12, 120 + 32, 320 (72)
32, 320 (34)
Setting range
0,15...0,6 A (13)
0,35...1,4 A (19)
1,25...5 A (20)
3...12 A (20)
4,5...18 A (16)
8...32 A (18)
Voltage
110...240 Vac / 110...220 Vdc (29)
24 Vac (26)
24 Vdc (30)
48 Vac / 48...72 Vdc (21)
106 Results
Sort by
Availability

Ø 7 - 15 working days (*)
Schneider Electric LUC A05B
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vac
146.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A05BL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vdc
149.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A05ES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 48 Vac / 48...72 Vdc
146.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A05FU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 110...240 Vac / 110...220 Vdc
146.10 CHF
1 pcs available immediately
Schneider Electric LUC A12B
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vac
156.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A12BL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vdc
160.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A12ES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 48 Vac / 48...72 Vdc
156.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A12FU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 110...240 Vac / 110...220 Vdc
156.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A18B
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vac
175.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A18BL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vdc
180.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A18ES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 48 Vac / 48...72 Vdc
175.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A18FU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 110...240 Vac / 110...220 Vdc
175.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A1XB
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vac
141.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A1XBL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vdc
146.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A1XES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 48 Vac / 48...72 Vdc
141.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A1XFU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 110...240 Vac / 110...220 Vdc
141.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A32B
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vac
272.00 CHF
1 pcs available immediately
Schneider Electric LUC A32BL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vdc
277.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A32ES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 48 Vac / 48...72 Vdc
272.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC A32FU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 110...240 Vac / 110...220 Vdc
272.00 CHF
on request
Schneider Electric LUC AX6B
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vac
137.30 CHF
on request
Schneider Electric LUC AX6BL
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vdc
140.40 CHF
on request
Schneider Electric LUC AX6ES
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 48 Vac / 48...72 Vdc
138.50 CHF
on request
Schneider Electric LUC AX6FU
  • Standard control unit
  • Version Standard control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 110...240 Vac / 110...220 Vdc
137.30 CHF
on request
Schneider Electric LUC B05B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vac
153.10 CHF
on request
Schneider Electric LUC B05BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vdc
156.90 CHF
on request
Schneider Electric LUC B05ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 48 Vac / 48...72 Vdc
153.10 CHF
on request
Schneider Electric LUC B05FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 110...240 Vac / 110...220 Vdc
153.10 CHF
on request
Schneider Electric LUC B12B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vac
167.00 CHF
on request
Schneider Electric LUC B12BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vdc
170.10 CHF
on request
Schneider Electric LUC B12ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 48 Vac / 48...72 Vdc
167.00 CHF
on request
Schneider Electric LUC B12FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 110...240 Vac / 110...220 Vdc
167.00 CHF
on request
Schneider Electric LUC B18B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vac
184.70 CHF
on request
Schneider Electric LUC B18BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vdc
187.20 CHF
on request
Schneider Electric LUC B18ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 48 Vac / 48...72 Vdc
186.00 CHF
on request
Schneider Electric LUC B18FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 110...240 Vac / 110...220 Vdc
184.70 CHF
on request
Schneider Electric LUC B1XB
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vac
150.50 CHF
on request
Schneider Electric LUC B1XBL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vdc
153.10 CHF
on request
Schneider Electric LUC B1XES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 48 Vac / 48...72 Vdc
151.70 CHF
on request
Schneider Electric LUC B1XFU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 110...240 Vac / 110...220 Vdc
150.50 CHF
on request
Schneider Electric LUC B32B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vac
289.70 CHF
on request
Schneider Electric LUC B32BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vdc
294.80 CHF
on request
Schneider Electric LUC B32ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 48 Vac / 48...72 Vdc
291.00 CHF
on request
Schneider Electric LUC B32FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 110...240 Vac / 110...220 Vdc
289.70 CHF
on request
Schneider Electric LUC BX6B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vac
147.40 CHF
1 pcs available immediately
Schneider Electric LUC BX6BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vdc
149.30 CHF
on request
Schneider Electric LUC BX6FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 110...240 Vac / 110...220 Vdc
146.10 CHF
on request
Schneider Electric LUC C05B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vac
153.10 CHF
on request
Schneider Electric LUC C05BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vdc
156.90 CHF
on request
Schneider Electric LUC C05ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 48 Vac / 48...72 Vdc
154.30 CHF
on request
Schneider Electric LUC C05FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 110...240 Vac / 110...220 Vdc
153.10 CHF
on request
Schneider Electric LUC C12B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vac
167.00 CHF
on request
Schneider Electric LUC C12BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vdc
170.10 CHF
on request
Schneider Electric LUC C12ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 48 Vac / 48...72 Vdc
168.30 CHF
on request
Schneider Electric LUC C12FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 110...240 Vac / 110...220 Vdc
167.00 CHF
on request
Schneider Electric LUC C18BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vdc
187.20 CHF
on request
Schneider Electric LUC C18FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 110...240 Vac / 110...220 Vdc
184.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C1XB
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vac
150.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C1XBL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vdc
153.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C1XES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 48 Vac / 48...72 Vdc
151.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C1XFU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 110...240 Vac / 110...220 Vdc
150.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C32B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vac
291.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C32BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vdc
294.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC C32FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 110...240 Vac / 110...220 Vdc
289.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC CX6B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vac
147.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC CX6BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vdc
149.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC CX6FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 1-phase (Class 10)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 110...240 Vac / 110...220 Vdc
147.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D05B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vac
154.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D05BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vdc
156.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D05ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 48 Vac / 48...72 Vdc
154.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D05FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 110...240 Vac / 110...220 Vdc
153.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D12B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vac
168.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D12BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vdc
170.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D12ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 48 Vac / 48...72 Vdc
168.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D12FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 110...240 Vac / 110...220 Vdc
167.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D18BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vdc
187.20 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D18FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 110...240 Vac / 110...220 Vdc
184.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D1XB
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vac
151.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D1XBL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vdc
153.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC D1XES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 48 Vac / 48...72 Vdc
151.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC D1XFU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 110...240 Vac / 110...220 Vdc
151.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC D32B
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vac
289.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC D32BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vdc
294.80 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC D32ES
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 48 Vac / 48...72 Vdc
289.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC D32FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 110...240 Vac / 110...220 Vdc
289.70 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC DX6BL
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vdc
175.20 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC DX6FU
  • Advanced control unit
  • Version Advanced control unit
  • Motor 3-phases (Class 20)
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 110...240 Vac / 110...220 Vdc
147.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC L05B
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vac
147.40 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC L05BL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 24 Vdc
149.30 CHF
Ø 3 - 7 working days (*)
Schneider Electric LUC L05ES
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 48 Vac / 48...72 Vdc
147.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L05FU
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 1,25...5 A
  • Voltage 110...240 Vac / 110...220 Vdc
147.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L12B
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vac
160.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L12BL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 24 Vdc
161.90 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L12ES
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 48 Vac / 48...72 Vdc
160.70 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L12FU
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 3...12 A
  • Voltage 110...240 Vac / 110...220 Vdc
158.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L18B
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vac
176.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L18BL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 24 Vdc
179.00 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L18ES
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 48 Vac / 48...72 Vdc
176.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L18FU
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 4,5...18 A
  • Voltage 110...240 Vac / 110...220 Vdc
176.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L1XB
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vac
145.50 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L1XBL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 24 Vdc
147.40 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L1XFU
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,35...1,4 A
  • Voltage 110...240 Vac / 110...220 Vdc
170.10 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L32B
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vac
278.30 CHF
on request
Schneider Electric LUC L32BL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 24 Vdc
278.30 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC L32FU
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 32, 320
  • Setting range 8...32 A
  • Voltage 110...240 Vac / 110...220 Vdc
275.80 CHF
Ø 7 - 15 working days (*)
Schneider Electric LUC LX6BL
  • Standard control unit
  • Version Magnetic control unit
  • Motor 1- and 3-phases
  • For basic unit 12, 120 + 32, 320
  • Setting range 0,15...0,6 A
  • Voltage 24 Vdc
143.60 CHF
 
 

ABOUT US

PRODUCTS SUPPORT AND SERVICE OUR PARTNER
  Company
Your requirements

Contact
Vacancies

+41 (0)56 222 38 18
mailbox@sentronic.com

LinkedIn Profil Sentronic AG

Sensors
Automation
Components
Distribution, Wiring
Ex Zone


ACTUAL
News
OEM Login Request
Call orders
More than 30 years of experience
Your requirements, our solutions
Testing units

Sensor KnowHow


Software Download

Available second source solutions
Crouzet
Panasonic
Telemecanique
Schneider Electric
Sensata Technologies
Kimo Instruments
Quintex
M-System
             
    (*) Due to worldwide resource problems, there may be deviations in the stated delivery times! 
 
             

 

Your E-mail: